The reasoning behind this makes no sense to me. You might as well not add the peers without AllowedIPs and address at all, as whatever was targeted at this interface, would not match peer with empty AlloweIPs, and be encrypted with the key of the "hub". The hub is then responsible fo...
Endpoint - Ubuntu 服务器,加上分号,再加上 WireGuard 端口(51820)。 AllowedIPs - 0.0.0.0/0 一旦完成,点击"Save"按钮。 五、将节点添加到服务器 最后一步就是将客户端的公钥和 IP 地址添加到服务器: sudo wg set wg0 peer CLIENT_PUBLIC_KEY allowed-ips 10.0.0.2 确保修改CLIENT_PUBLIC_KEY为你在客户...
Allow IPs: 需要走隧道的IP段, 一般包含隧道自身IP段, 以及要借道隧道的IP段, 但是这里设置并不会产生对应的route Endpoint: 服务端的IP和端口 Persis.Keepalive: 25 保持活动的时间间隔 其他都可以留空 IPv4 IPv4 method: Automatic (DHCP) 实际产生的IP还是之前在Identity->Interface中配置的IP地址 DNS: Automa...
debian没有这个配置项,也没这个问题。它的路由都有src,和openwrt不勾route_allowed_ips一样。 如果这两个peer的AllowIPs中,还有对方后续的其他网段。openwrt就只能自己手工添加route规则了。debian没测试,也许用PostUp,PreDown的interface配置项,能解决。 或者,把两个网段,配置成两个独立的wg0,wg1。互连...
#服务端allowip不能写服务端外网ip段和本机内网ip段,只需要写本机想通过vpn组网要访问到哪个网段,我这里服务端只写了虚拟地址段,因为我没有服务端直接访问客户端内网ip段的需求 AllowedIPs = 178.10.10.2/32 EOF 第一次启动服务用restart systemctl restart wg-quick@wg0.service; ...
peer2需要添加peer配置中的allowIps [Peer] PublicKey = SHZ2K6oIVSTdtPld3i7zJnXKOrKAwk1ynMn1mry5CF0= AllowedIPs = 5.5.5.2/32,192.168.1.0/24 PersistentKeepalive = 15 重新启动wg,再使用peer2去访问192.168.1.151即可。 4、公网机器充当中转机(最终实现) ...
ufw allow51820/udpecho'net.ipv4.ip_forward=1'|tee-a /etc/sysctl.conf sysctl -p 到这里,服务端就配置好了。接下来是客户端,这里主要讲解一下 Windows WireGuard 客户端的配置。 在wireguard.org 上下载 Windows 客户端,安装之后打开,点击“新建空隧道”,并在“创建新隧道“对话框中输入”名称“和配置信息...
Allow IPs: 需要走隧道的IP段, 一般包含隧道自身IP段, 以及要借道隧道的IP段, 但是这里设置并不会产生对应的route Endpoint: 服务端的IP和端口 Persis.Keepalive: 25 保持活动的时间间隔 A网络10.10.4.8节点配置 10.10.4.8节点wg0.conf配置 cat /etc/wireguard/ wg0.conf [Interface] Address = 10.30.0.1/24...
PublicKey=hXhveUdRmz6uQEr+7fQOh1YQ1c56sTiIXfzHVTmeBGs=# clients'VPNIPaddresses you allow to connect # possible to specify subnet ⇒[172.16.100.0/24]AllowedIPs=172.16.100.5 4、内核开启IPv4转发 代码语言:javascript 复制 vi/etc/sysctl.conf ...
Allow IPs: 需要走隧道的IP段, 一般包含隧道自身IP段, 以及要借道隧道的IP段, 但是这里设置并不会产生对应的route Endpoint: 服务端的IP和端口 Persis.Keepalive: 25 保持活动的时间间隔 A网络10.10.4.8节点配置 10.10.4.8节点wg0.conf配置 cat /etc/wireguard/ wg0.conf ...