A wrapper for Wire library meant to be put in place of cI2C library on SAM, ESP8266... targets Library choice cI2C library implements I2C bus for AVR targets (Uno, Nano, Mega...) you may prefer this one when: w
Fast LCD driver written from scratch for ESP8266 for driving ILI9341 (240x320) or ILI9486 / ILI9488 (320x480) compatible LCD controllers using 4-wire SPI interface.ESP8266's HSPI interface is used (full 16 x 32-bit buffer). There's also option for full SW bit-banging (for any GPI...
Project compiles using ESP Open SDK - or esp8266-devkit by CHERTS @see https://github.com/pfalcon/esp-open-sdk @see https://github.com/CHERTS/esp8266-devkit Display drivers from third parties A few of the display driver functions are from the Adafruit GFX Library @see https://github.com...
I'm using the libraries to interact with sensors and screen. Each library has its own Wire.begin(int sda, int scl) call during the initialization. Most of the time after the second Wire.begin(int sda, int scl) call NodeMCU1.0 reboots. I've tested the code on Arduino Nano with hardwar...
wireshark 抓取内网微信,1.说明本文将使用CoAP协议来对接华为OC平台,使用的通信模组是ESP8266,如果使用NB-IOT来对接华为OC平台简单很多,因为NB-IOT的设备标识符在平台绑定,那么使用几个AT指令即可完成华为OC平台的对接和发送数据。小熊派的官方教程有很多关于对接华为O
This script only uses the Wire.h library, nothing else. Works with ESP8266, ESP32 and similar Arduino script features Read temperature / humidity from AHT20 Read temperature / pressure from BMP280 No long loop times when reading the AHT20 ...
MicroPython已经实现了ESP8266基本硬件资源接口,包括GPIO、PWM、ADC、软SPI和硬SPI、IIC、睡眠模式(Deep-sleep mode)、OneWire等,带有APA102、DHT和DS18B20库。所以使用MicroPython可以快速实现产品原型,比如智能插座,温湿度检测、智能RGB调光器等。 TPYBoardv202:支持MicroPython兼容NodeMCU ...
#include <ESP8266WiFi.h> #include <OneWire.h> #include <DallasTemperature.h> const char* ssid = "XXXXXXXXXXXXX"; const char* password = "XXXXXXXXXXXXX"; const int SENSOR_PIN = D4; // Arduino pin connected to DS18B20 sensor's DQ pin OneWire oneWire(SENSOR_PIN); // setup...
DHT, Counter, Uptime support enabled Wifi manager for esp8266/esp32 enabled RESTART_LAN_ON_MQTT_ERRORS disabled DEVICE_NAME disabled SYSLOG_ENABLE disabled WITH_PRINTEX_LIB disabled, using Streaming library CS811 and HDC1080 sensors support are enabled...
Library to use i2c analog IC with arduino and esp8266. Can read analog value and write analog value with only 2 wire (perfect for ESP-01). 01/02/2024: v1.1.2 Add the possibility to insert address at begin() function 10/07/2023: v1.1.1 Add support for Arduino UNO R4 16/02/2023...