Pin 16 is used as the chip select for PSRAM, and 17 is used for the clock signal. It would probably be good to note this above. You can see it on the schematics on the WROVER datasheet: https://www.espressif.com/sites/default/files/documentation/esp32-wrover_datasheet_en.pdf Reply ...
(&wrapper);//...that the pin interface needs to communicate with the controller//Arduino Uno/Nano example pinsconstuint8_tdPinIn =12;//any pin; connect switch against GND and +V (or use only GND and INPUT_PULLUP below)constuint8_tdPinOut =13;//any pin; connect LED with resistor ...
of no help here, but ive just made a pcb which uses the onboard fv-1 sounds, and 2 eeproms, for a total of 24 patches..with a toggle to select banks a/internal/b...just waiting on the pcbs..and will be able to just plug in my pickit2 into the side and reprogram the eeprom...
Burner/Programmer: The Programming or burning a microcontroller means “to transfer the program from compiler to the memory of the microcontroller”. The program for the microcontroller is generally written in C or assembly language, finally the compiler generates a hex file which contains the machine...