百度试题 题目What is the subnet for the host IP address 172.16.210.0/22?() A. 172.16.42.0 B. 172.16.107.0 C. 172.16.208.0 D. 172.16.252.0 E. 172.16.254.0 F. None of the above 相关知识点: 试题来源: 解析 C.172.16.208.0 反馈 收藏 ...
楼上的好象算错了吧，28说明他的网络位为28位，68转换为2进制是01000100，所以前面的0100是网络为为固定，它的子网掩码为255.255.255.240，他的子网可以从201.100.5.65---201.100.5.78(主机位不能全为0或1)
The subnetting tutorial below contains key tips for the process. After outlining what IP addresses are and how they work, we’ll take a look at what subnetting is. I’ll cover key components and processes such as subnet classes and subnet masking and organizing and managing subnets. All of ...
An EIP can be bound to or unbound from a virtual private cloud (VPC) resource, such as an elastic cloud server (ECS), bare metal server (BMS), virtual IP address, or elastic load balancer in a VPC subnet. A VPC resource bound with an EIP can use the EIP to communicate with the ex...
If a node fails to be connected to the Internet, perform the following operations:Check Item 1: Whether an EIP Has Been Bound to the Node Log in to the ECS console and check whether an EIP has been bound to the ECS corresponding to the node. If there is an IP address in the EIP ...
The subnet mask says, "Does this packet belong on this part of the network or not?" The IPv4 subnet mask accomplishes this job by adding a second 32-bit set of dotted decimal information. Each bit of the mask is logically ANDed to the digits of the IP address. Thus, a typical IPv4...
The unicast client/server mode is used on a higher stratum on a synchronization subnet. In this mode, the IP address of the server needs to be obtained in advance. You only need to configure the client. The server only needs to be configured with an NTP primary clock. Note that the cli...
The local and remote gateways must be in the same IP address range. You need to plan this IP address range by yourself. This IP address range cannot conflict with that used by your on-premises network. Generally, a subnet with a 30-bit mask is recommended.Parent...
This feature provides the ability to have two DHCP servers serve IP addresses and option configuration to the same subnet or scope, providing for continuous availability of DHCP service to clients. The two DHCP servers replicate lease information between them, allowing one server to assume responsibil...
2.In Control Panel -> Network -> TCP/IP,select Properties -> IP Address, make sure the IP addresssetting and subnet mask are in the same range as your other workingcomputers. 22people found this useful. Did you find this usef...