Hence saving the device(s) from experiencing a power surge, which would damage the device and may risk the safety of those nearby. If the voltage is suppressed in this way, the voltage is said to have been “clamped”. For example, a nominal voltage of the device is 120V and it works...
There are two answers to that. One is the transformer that converts the mains voltage into a lower voltage suitable for the amp's circuitry. If an amp is rated at 500 Watts, for instance, the transformer has to be able to supply all that power, and more. So it needs substantial coppe...
Large voltages must be stepped down to the nominal digitizing level. There are sensors for this, including potential transducers (PTs) which can divide the thousands of volts on an electrical transmission line down to a safe level. The output of a PT is then fed into the voltage signal condi...
The shape of the circuit so formed resembles that of a symbolΠ, and for this reason, it is known as the nominal Π representation of amedium transmission line. It is mainly used for determining the general circuit parameters and performingload flowanalysis. Here, VSis the supply end voltage,...
152 G7 TTL Voltage output is 5 Vcc, 152 G7 Voltage output is nominal voltage input -1.5Vcc. If the sensor is connected to the acquisition system the use of dedicated measurement connectors and matching cables is recommended. Please refrain from extending the cable. Otherwise, the sensor's ...