303 is an austenitic stainless steel grade known for its excellent machinability, attributed to its sulfur content, which ranges between 0.15% and 0.35%. It contains 18% chromium and 8% to 10% nickel. Although these elements usually provide good corrosion resistance, the sulfur significantly reduce...
The orifice plate can be made of any material, although stainless steel is the most common. The thickness of the plate used (1/8 – 1/2") is a function of the line size, the process temperature, the pressure, and the differential pressure. The traditional orifice is a thin circular pla...
At MetalTek, we pride ourselves on offering quality stainless-steel products, including duplex and super duplex stainless steel. Known... Read More >> about Complete Guide To Duplex And Super Duplex Stainless Steel What is Vacuum Investment Casting? October 30, 2024 Manufacturers in high-comp...
or by reducing the shank diameter. Generally, it is preferable to use several thin bolts rather than one large one if the large bolt cannot be preloaded properly or the clamping length cannot be increased suitably. The clamped members can be kept stiff by avoiding the use of steel in prefer...
Tin is commonly used as a dry-film lubricant on stainless steel fasteners to avoid galling in high load applications. Cost Savings: Since tin is readily available and non-precious, it is a considerable cost saver when compared to other precious coatings such as gold, silver, or palladium. In...
9 RegisterLog in Sign up with one click: Facebook Twitter Google Share on Facebook AcronymDefinition SIFCOSteel Improvement and Forge Company Copyright 1988-2018AcronymFinder.com, All rights reserved. Suggest new definition Want to thank TFD for its existence?Tell a friend about us, add a link...
Despite being softer than steel, bronze and brass are both corrosion resistant, even in the presence of salt, and so are widely used for fittings on boats. Brass is also resistant to ‘galling,’ when the metal wears against itself. This means that brass can also be used for mechanical ...
it is preferable to use several thin bolts rather than one large one if the large bolt cannot be preloaded properly or the clamping length cannot be increased suitably. The clamped members can be kept stiff by avoiding the use of steel in preference to soft materials such as cast iron, lig...