Most desktop computers include one built-in Ethernet port that is used to connect the device to a wired network. A computer's built-in Ethernet port is connected to its internal Ethernetnetwork adapter, called anEthernet card, which is attached to themotherboard. Laptops usually have an Etherne...
High-density ethernet ports In this context, density refers to the number of ports an Ethernet switch allows. The more ports on a switch, the more devices that can connect to the network directly. Having multiple ports allows for simultaneous connections, which is vital for office environments....
Before creating an RRPP ring, disable STP on the interfaces to be added to the RRPP ring. The RRPP convergence speed depends on the number of domains and rings. The convergence speed is high when the number of domains and rings is small. Перевод Коллекция Загру...
used in 100GEthernetdue to its lack of technology maturity and high cost. During the formulation of the 200G/400G interface standard, the common requirement is to increase the data rate of each pair of differential lines to 50 Gbit/s or higher. If NRZ technology is still used, the time...
The Raspberry Pi is often used as an inexpensive network attached storage (NAS) device or local file server. This takes advantage of the Ethernet/WiFi connectivity and microSD storage to share files on your network. Using Samba and/or NFS allows easy mounting of the Pi’s storage from Window...
inet on ethernet (e) is used to configure an IP address for the security device. You can set the IP address of the security device to be on the same network segment as the PC that provides FTP services. If the IP address of the security device is on a different network segment from ...
PCIe is a point-to-point connection between two PCIe compatible devices, typically a motherboard and an expansion card or storage device such as an SSD or hard drive. The connection uses differential signaling to transmit data over separate pairs of copper wires, allowing for speeds up to 16 ...
to the Internet or another network. A wired network has some disadvantages when compared to a wireless network. The biggest disadvantage is that your device is tethered to a router. The most common wired networks use cables connected at one end to an Ethernet port on the network router and ...
Used for fault-tolerant systems that do not require high update rates. The maximum data transfer rate is 125 kbps, but the wiring is thus more economical than high-speed CAN. In automotive applications, low-speed CAN is used for diagnostics, dashboard controls and displays, power windows, etc...