For minor dents and holes in walls, the most effective resolution is to use a dab of paint that matches the existing colour. For larger defects, it's often best to completely substitute the drywall. Depending on the extent of the injury and the number of sheets of drywall that ...
When building a door jamb to fit a standard wall with a two-by-four frame and 1/2-inch drywall on each side, the width of the jamb board typically is 4 9/16 inches. If you're not using premade jamb material, or if your walls are a nonstandard thickness, you can buy 5- or 6-...
can be applied to either bare or painted drywall as long as the surface is blemish-free. To prepare the surface, don protective gloves and goggles andapply the spackling compoundto divots or cracks. Dry the compound according to the package instructions, then sand with fine-grit sandpaper. ...
Because of the layers that show on the edge, you have to finish off the edges somehow. This can be done with iron-on edge banding or with pieces of lumber or decorative molding. Plywood will often splinter on the edges when cut, so it’s harder to get a smooth cut with plywood t...