wg-quick up wg0 [#] iplinkadd wg0typewireguard[#] wg setconf wg0 /dev/fd/63[#] ip address add 192.168.255.1/24 dev wg0[#] iplinksetmtu 8921 dev wg0[#] iplinksetwg0 up[#] iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE; sy...
当我sudo wg-quick up wg0-client时,我得到: [#] wg setconf wg0-client /dev/fd/63[#] ip link set mtu 1 浏览20提问于2019-04-12得票数 7 1回答 配置持久有线网络接口 、、 手动服务器和客户端配置工作良好。10.0.0.4/8ip link set up dev wg0# interface: wg0当向/etc/网络/接口添加接口...
wg is the configuration utility for getting and setting the configuration of WireGuard tunnel interfaces.
If one of those routes is the default route (0.0.0.0/0 or ::/0), then it uses ip-rule(8) to handle overriding of the default gateway. The configuration file will be passed directly to wg(8)'s `setconf' sub-command, with the exception of the following additions to the Interface ...
Log output from wg-quick up wg0: [#] ip link add wg0 type wireguard [#] wg setconf wg0 /dev/fd/63 [#] ip -4 address add 10.200.200.2/24 dev wg0 [#] ip link set mtu 1420 up dev wg0 [#] resolvconf -a wg0 -m 0 -x [#] wg set wg0 fwmark 51820 [#] ip -4 route...
When I place wg1.conf and wg2.conf in the config/wg_conf directory, I get the following: *** Activating tunnel /config/wg_confs/wg1.conf *** wireguard | [#] ip link add wg1 type wireguard wireguard | [#] wg setconf wg1 /dev/fd/63 wireguard | [#] ip -4 address add 192.16...
wg0.conf /etc/wireguard nanopineo:~:# wg-quick up wg0 [#] ip link add wg0 type wireguard [#] wg setconf wg0 /dev/fd/63 [#] ip -4 address add 10.66.0.9/24 dev wg0 [#] ip -6 address add 2001:470:ecd6:1::9/64 dev wg0 [#] ip link set...
## 问题原因 我可以理解,开发人员不想使用苹果使用的旧bash v3。但从用户的帖子来看,安装一个较新的bash并不那么好 所以我看了wireguard的wg-quick。需要支持的唯一变化,两个bash版本都是为了摆脱关联数组SERVICE_DNS,并处理v3的BASHPID。 ## 解决方案
2363 ExecStart=/usr/bin/wg-quick up wg0 (code=exited, status=2) Main PID: 2363 (code=exited, status=2) Feb 03 15:29:04 DietPi wg-quick[2363]: [#] wg setconf wg0 /dev/fd/63 Feb 03 15:29:04 DietPi wg-quick[2363]: [#] ip address add 10.8.0.1/24 dev wg0 Feb 03 15:29...
Kilo is a multi-cloud network overlay built on WireGuard and designed for Kubernetes (k8s + wg = kg) - squat/kilo