It has a mid-sized illuminated rocker switch (not the wide separate switch and lamp) which I have also seen on some WTCP on EBay in the USA. Still in use but what brought me here was finally deciding to replace the switch because it has been unlit for years. I haven’t found a Ca...
IX. Honor thy “KGB” (Known Good Base). Do not plug a non-working soldering iron into a KGB. This could cause damage to the base. X. Thou shall turn the station down to lowest setting or use pre-programed set-back when not in use. Turning the station down during non-use periods...
IX. Honor thy “KGB” (Known Good Base). Do not plug a non-working soldering iron into a KGB. This could cause damage to the base. X. Thou shall turn the station down to lowest setting or use pre-programed set-back when not in use. Turning the station down during non-use periods...
I've always believed a soldering station with good temperature stability and decent thermal recovery is more important than the accuracy of the displayed temperature. Leave the fussy temperature calibration for production facilities that require traceability. Once you've been soldering long enough, you ...