The washing machine has hot and cold water connections. The water supplies are mixed via valves with set flow rates and the heating current used is varied, depending on the temp. of the mixed water. The hot and cold water valves can have the same flow rates. The heating current is ...
Is the water turned on? Ensure the Hot and Cold water valves are fully open; both hot and cold inlet hoses must be connected for the washer to operate correctly. Check the water inlet hoses. Ensure the hoses are not kinked, which can restrict water flow. Are they connected correctly?
Color:Black;Type:Normally Closed Solenoid Valve;Application:water valve;Material:Stainless Steel;Temperature Range:1℃ ~100℃;Allowable ambient temperature:Below 40℃;Rated operational voltage:DC24V;Rated current:DC24V 300±30mA;Water body:Clean hot and
Chrome Tap with Hot and Cold Inlet for Washing Machine WM Tap Product Name Sphere autodrilling tap for washing machine chrome Material Brass Size 1/2" Type Bent Working Pressure 1.6MPa Working Temperature -20°C to 120°C Application water Delivery Time About 45...
This is a new washing machine fitted with an additional intake for hot water and with solenoid valves, thermostats and other parts for adjusting the intake of hot water and mixing it with cold water; when warm or hot water is required, it takes it from the second intake from the hot wate...
The machine can be operated automatically under the control of a sequence timer 150 and level responsive switches 151 and 152 which are in pneumatic communication with the liquid in sump 50. Hot and cold water supplies are controlled by solenoid-operated valves and a pump 145 is used to ...
Another object of this invention is to provide a washing machine of the character referred to including a pre-mixing tank for receiving the sours, soaps, bleaches, bluing, etc. and hot and cold water for the cyclic washing operations, arranged to discharge the resultant solutions into the wash...
Product name:Brass Angle Valve;Application:Cold and Hot Water;Size:1/2'' 3/4'' or Customized;Pressure:PN25;Advantage:Corrosion Resistant;Color:Silver;Packing:Plastic Bag+Carton;Material:Brass;OEM:Acceptable;Usage:Control Water;Application:General;Warrant
There are two types of water hose (hot and cold) located at the back of the washing machine and it needs to be connected to the respective valve. Also, check to see if the hot and cold-water supply hoses are not kinked and both water supply valves are completely open, and the hose...
Inlet valves allow for introduction of hot and cold water and additives such as-soap, fabric softener, chlorine bleach and emulsifiers. A large orifice valve positioned between the washing machine fill reservoir and the washer drum enables prompt introduction of the fluid maintained in the washing ...