Finally, I have been trying to resolve an issue of brake pedal ‘feel’ where the first 1-2” of travel are quite a bit softer than the rest of the travel when the pedal firms up nicely. I think I have found the problem: I mixed up the servo from a mk1 16V and the master cylin...
Removal and assembly tool. This tool is used for removing the fuel gauge sender. About 80mm in diameter. 1/2" drive. $149.99 Volkswagen 3214 Special wrench to remove fuel pump. 1/2" drive. Hard plastic. This tool will apply limited torque. Be sure the tool is inserted correctly and...
I did have to back off somewhat on my brake pedal preload - I have a custom linkage that allows me to set the servo/MC preload to reduce pedal travel but I was at the point where there was a bit of self braking once the system was fully warmed up - backing off the brake pedal 1...
horizontal please note, this is a flat print of the original artwork and is not embellished. fade-resistant inks for a long-lasting and vibrant color profile. 100% made in the usa. hand assembled by highly trained craftsmen. ready to hang right out of the box. absolutely no assembly ...