--Creating VLANs on WAN interfaces is not a common practice because WAN interfaces are usually dedicated to connecting to external networks like ISPs. --ISPs usually provide a single logical connection on a WAN interface; there's generally no need to segment this connection with VLANs. --The ...
[Sysname] interface vlan-interface 1 [Sysname-Vlan-interface1] default 1.1.2 description description命令用来配置VLAN或VLAN接口的描述信息。 undo description命令用来恢复缺省情况。 【命令】 description text undo description 【缺省情况】 VLAN的描述信息为“VLAN vlan-id”,其中vlan-id为该VLAN的四位数编号,如...
当使用路由器连接时,一般需要在LAN接口上设置对应各VLAN的子接口;而三层交换机则是在内部生成“VLAN接口”(VLAN Interface)。VLAN接口,是用于各VLAN收发数据的接口。(注:在Cisco的Catalyst系列交换机上,VLAN Interface被称为SVI——Switched Virtual Interface) 为了与使用路由器进行VLAN间路由对比,让我们同样来考虑一下...
[Sysname] interface vlan-interface 1 [Sysname-Vlan-interface1] bandwidth 10000 1.1.2 description 【命令】 description text undo description 【视图】 VLAN视图/VLAN接口视图 【缺省级别】 2:系统级 【参数】 text:VLAN或VLAN接口的描述字符串,可以包含字母(区分大小写)、数字、特殊字符(包括~ ! @ # $ %...
[RouterA]interface ethernet 2/0/0 [RouterA-Ethernet2/0/0]bridge 1 [RouterA-Ethernet2/0/0]bridge vlan-transmit enable [RouterA-Ethernet2/0/0]quit 配置Switch1 # 创建VLAN。 <Huawei>system-view [Huawei]sysname Switch1 [Switch1]vlan 11 ...
分割广播域时,一般都必须使用到路由器。使用路由器后,可以以路由器上的网络接口(LAN Interface)为单位分割广播域。 但是,通常情况下路由器上不会有太多的网络接口,其数目多在1～4个左右。随着宽带连接的普及,宽带路由器(或者叫IP共享器)变得较为常见,但是需要注意的是,它们上面虽然带着多个(一般为4个左右)连接LA...
(s) (10GE3/0/1-3/0/4) will be converted to stack mode and be configured with the port crc-statistics trigger error-down command if the configuration does not exist. 2.The interface(s) may go Error-Down (crc-statistics) because there is no shutdown configuration on the interfaces....
[Quidway-Vlan-interfacex]ip address 10.1.1.11 255.255.0.0 配置VLAN的IP地址 [Quidway]ip route-static 0.0.0.0 0.0.0.0 10.1.1.1 静态路由=网关 3、telnet配置 ...
1) So if my thoughts were predictably correct, that WAN port is a L3 interface which belongs actually to the internal router, but has been placed near the switch interface for the sake of packaging, and so on... just like having let’s say a Cisco 1841 router with the HWIC-4ESW integ...
1) So if my thoughts were predictably correct, that WAN port is a L3 interface which belongs actually to the internal router, but has been placed near the switch interface for the sake of packaging, and so on... just like having let’s say a Cisco 1841 router with the HWIC-4ESW integ...