方法1：set_property SEVERITY {Warning} [get_drc_checks NSTD-1]set_property SEVERITY {Warning} [get_drc_checks RTSTAT-1]set_property SEVERITY {Warning} [get_drc_checks UCIO-1]方法2：set_property BITSTREAM.CONFIG.UNUSEDPIN Pulldown [current_design]set_property BITSTREAM.CONFIG.UNUSEDPIN Pullup ...
set_property SEVERITY {Warning} [get_drc_checks NSTD-1] set_property SEVERITY {Warning} [get_drc_checks RTSTAT-1] set_property SEVERITY {Warning} [get_drc_checks UCIO-1] 将这三句添加到时序约束文件(没有创建一个),即可解决Vivado未分配引脚约束报错的问题 ——— 版权声明:本文为CSDN博主「暖暖的...
//方法1:set_property SEVERITY {Warning} [get_drc_checks NSTD-1]set_property SEVERITY {Warning} [get_drc_checks RTSTAT-1]set_property SEVERITY {Warning} [get_drc_checks UCIO-1]//方法2:set_property BITSTREAM.CONFIG.UNUSEDPIN Pulldown [current_design]set_property BITSTREAM.CONFIG.UNUSEDPIN Pull...
1、新建一个记事本,写下如下内容: set_property SEVERITY {Warning} [get_drc_checks NSTD-1] set_property SEVERITY {Warning} [get_drc_checks RTSTAT-1] set_property SEVERITY {Warning} [get_drc_checks UCIO-1] 2、保存,且文件名为name.tcl,见图: 3、在vivado软件中右键Generate Bitstream,选择Bitstrea...
若要更正此冲突,请指定所有I/O标准。除非所有逻辑端口都定义了用户指定的I/O标准值,否则此设计将无法生成位流。 要允许使用未指定的I/O标准值创建位流(不建议),请使用以下命令:set_property SEVERITY {Warning} [get_drc_checks NSTD-1].NOTE 使用Vivado Runs基础结构时(例如,launch_runs Tcl命令),请将此命...
set_property SEVERITY {Warning} [get_drc_checks RTSTAT-1] set_property SEVERITY {Warning} [get_drc_checks UCIO-1] 再重新生成即可。 8.Program and Debug:生成了下载文件后就可以去查看链接的电路板了,这里因为暂时还没有硬件,后续步骤以后再加上。
根据上述提示将以下保存成tcl文件。 set_property SEVERITY {Warning} [get_drc_checks NSTD-1] set_property SEVERITY {Warning} [get_drc_checks RTSTAT-1] set_property SEVERITY {Warning} [get_drc_checks UCIO-1] 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11....
(not recommended), use this command:set_property SEVERITY {Warning} [get_drc_checks UCIO-1]. NOTE: When using the Vivado Runs infrastructure (e.g. launch_runs Tcl command), add this command to a .tcl file and add that file as a pre-hook for write_bitstream step for the implementation...
(not recommended), use this command: set_property SEVERITY {Warning} [get_drc_checks NSTD-1]. NOTE: When using the Vivado Runs infrastructure (e.g. launch_runs Tcl command), add this command to a .tcl file and add that file as a pre-hook for write_bitstream step for the ...