INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121 INFO: [Labtools 27-3415] Connecting to cs_server url TCP:localhost:3042 解决方法: 一般情况下是因为Vivado的驱动没有安装好,只需要将驱动安装上即可,路径为D:\programme\Xilinx\Vivado\2019.2\data\xicom\cable_drivers\nt64\digile...
Vivado Hardware Manager找不到器件的记录信息: connect_hw_server -allow_non_jtagINFO:[Labtools27-2285] Connectingtohw_server url TCP:localhost:3121INFO:[Labtools27-3415] Connectingtocs_server url TCP:localhost:3042INFO:[Labtools27-3414] Connectedtoexisting cs_server. disconnect_hw_server localhost:31...
connect_hw_server -allow_non_jtag INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121 INFO: [Labtools 27-3415] Connecting to cs_server url TCP:localhost:3042 INFO: [Labtools 27-3414] Connected to existing cs_server. disconnect_hw_server localhost:3121 根据相关文档,收到...
disconnect_hw_server localhost:3121 connect_hw_server INFO-CSDN博客
重新安装必要的软件：如案例中提到的，重新安装Digilent软件可能解决连接问题。确保所有相关软件均为最新版本。重启硬件服务器：有时需要断开并重新连接硬件服务器，可以使用命令如disconnect_hw_server localhost:3121和connect_hw_server来重启硬件服务器。开发板设置问题：检查开发板上的开关和跳线设置：确保...
[Labtools 27-2269] No devices detected on target localhost:3121/xilinx_tcf/Digilent/210319AB51BBA. Check cable connectivity and that the target board is powered up then use the disconnect_hw_server and connect_hw_server to re-register this hardware target. ...
Digilent/Xilinx cable switch settings are correct.1. If you are using Xilinx Platform Cable USB, ensure that status LED is green.解决：之前不小心删掉了digilent这个软件，从新安装之后，功能恢复正常。安装参考流程如下：disconnect_hw_server localhost:3121 connect_hw_server INFO-CSDN博客 ...
使用disconnect_hw_server和connect_hw_server重新初始化硬件目标。使用open_hw_target重新注册硬件设备。谢...
" [Labtoolstcl 44-26] No hardware targets exist on the server [TCP:localhost:3121] Check to make sure the cable targets connected to this machine are properly connected and powered up, then use the disconnect_hw_server and connect_hw_server co...
to the target (even though I click Cancel). The GUI also doesn't run disconnect_hw_server or...