解决了，是板子上的通信端口的黑帽子掉了，导致没法连接信号
默认文件夹。vivado运行生成的文件都会放在默认文件夹，可以在设置里面查看默认文件夹位置。Vivado设计套件，是FPGA厂商赛灵思公司2012年发布的集成设计环境。包括高度集成的设计环境和新一代从系统到IC级的工具，这些均建立在共享的可扩展数据模型和通用调试环境基础上。集成的设计环境——Vivado设计套件包括高度...
on an Ubuntu 14.04 LTS machine that previously had 2014 and 2015 versions installed and working ...
If the JTAG Clock is inactive or unavailable, you are not able to connect to the hardware target. If the Debug Hub Clock is inactive or unavailable, theVivadoHardware Manager issues the following error message: INFO: [Labtools 27-1434] Device xxx (JTAG device index = 0) is program...
2. Auto-Connect The second method is to automatically open the target. To get to the button either open the Hardware Manager and click the link in the green banner at the top of the window or click the button in the Flow Navigator under . From the drop-down that opens select . Viva...
• Automatically Update: Toggles the Properties window to auto-update as new objects are selected or to remain static displaying the properties of the currently selected object. By default, the Properties window is updated to display the properties of the latest object as new objects are selected...
TIP: Use the Auto Connect selection to automatically connect to a local hardware target. Connecting to a Hardware Target Using hw_server The hw_server is automatically started by Vivado when connecting to targets on the local machine. However, you can also start the hw_server manually on ...
CLKOUT_GROUPING {Auto,Auto,Auto,Auto,Auto,Auto,Auto} \ # CONFIG.CLKOUT_MATCHED_ROUTING {false,false,false,false,false,false,false} \ # CONFIG.CLKOUT_PORT {clk_out1,clk_out2,clk_out3,clk_out4,clk_out5,clk_out6,clk_out7} \ # CONFIG.CLKOUT_REQUESTED_DUTY_CYCLE {50.000,50.000,50.000...
This ethernet is not working and the following messages are printed continuously at the console, ---lwIP Socket Mode Echo server Demo Application --- Board IP: 192.168.1.10 Netmask : 255.255.255.0 Gateway : 192.168.1.1 WARNING: Not a Marvell or TI or Realtek Ethernet PHY. Please verify the...
TIP: Use the Auto Connect selection to automatically connect to a local hardware target. Connecting to a Hardware Target Using hw_server The hw_server is automatically started by Vivado when connecting to targets on the local machine. However, you can also start the hw_server manually on ...