2. Set the Virgin Media hub in Modem Mode Make sure that your PC is connected with an Ethernet cable or Wi-Fi to the hub. Open a browser of your choice, enter the following IP ((this is the default Virgin Media Hub IP address) into the address bar and press Enter:192.168.0.1 Log ...
Enter the Hub’s IP address192.168.100.1into the address bar of your browser Sign in to the Hub’s setting screen using the settings password, which you’ll find printed on the Hub Select theModem Modetab on the left-hand side of the screen ...
In a web browser, go to192.168.0.1and log into the Hub 3 config panel. Enter the Hub 3 password (the default code is printed on the bottom of the device). Switch toModem Mode, pickEnable Modem Mode, andApply changes. In modem mode, your IP address changes from 192.168.0.1 to 192.168...
in it failing to retrieve my WAN address. It does give me a LAN address but the port doesn't light up and it's unreachable. The NIC is working I've tested it in other devices. When I plug-in my old router to the modem (TP-Link WR1043ND that is flashed with OpenWRT), it ...
3) If the AP does not support DHCP, you can connect to the AP using a static IP address. 2 Description of each field in the Wi-Fi profile. 1) Network name: SSID (ID) 2) Security type: WEP, WPA-PSK/2 support. 3) Security key: saves the security key. 4) IP/DNS setting: ...
If the above solution does not work for you, then switch to modem mode in Virgin Media Hub. For doing this, you will need to set router mode to modem mode. Follow these steps to do enable modem mode: Firstly, connect your device to Hub 3. We would advise you to do this using an...