The receiving substrate was placed at the bottom of a glass petri dish for the duration of the experiments. The microchips with the striped nickel coating on the backside were spread over the receiving substrate. A permanent neodymium magnet (N48, nominal residual magnetism of 1.37–1.42 T,...
Then, 10 mL of the homogenous PVA solution was placed in a disposable plastic Petri dish (Miniplast, Israel), and the pates were kept in the oven at 37 °C for 22 h. 2.6. 3D-Printing of the Customized Holder The customized 3D-printed holder was modeled using Autodesk Fusion 360 ...
The slit holder and glass cuvette were held down firmly on the baseplate with screws. The laser sheet in the cuvette was created using a CO22 laser and the slit, which was 0.1 mm in width and 10 mm in height. The glass cuvette was filled with DMEM cell media (350 µL) and ...