当条件不互斥的时候,case和if会综合出带优先级的电路,对于case来说,如果 condition1 为真,则执行 true_statement1 ; 如果 condition1 为假,condition2 为真,则执行 true_statement2;依次类推。如果各个 condition 都不为真,则执行 default_statement 语句。后续仿真会体现上述内容。 当条件互斥的时候,if、case的...
因此,assign语句满足上面的要去,因为无论何时右侧的任何输入发生变化,输出o都会更新。 // the module takes four inputs and performs a boolean// operation and assigns output to o.// the combinational logic is realized using assign statementmodulecombo(inputa,b,c,d,outputo);assigno=~((a&b)|c^...
条件(if)语句用于控制执行语句要根据条件判断来确定是否执行。 条件语句用关键字 if 和 else 来声明,条件表达式必须在圆括号中。 条件语句使用结构说明如下: if(condition1)true_statement1;elseif(condition2)true_statement2;elseif(condition3)true_statement3;elsedefault_statement; ...
moduletop_module(input a,input b,input sel_b1,input sel_b2,output wire out_assign,output reg out_always);assign out_assign=(sel_b1&sel_b2)?b:a;always @(*)beginif(sel_b1&sel_b2)out_always=b;elseout_always=a;end endmodule 31. If statement latches 小知识点:如何避免产生latch(锁存器...
条件(if)语句用于控制执行语句要根据条件判断来确定是否执行。 条件语句用关键字 if 和 else 来声明,条件表达式必须在圆括号中。 条件语句使用结构说明如下: if (condition1) true_statement1 ; else if (condition2) true_statement2 ; else if (condition3) true_statement3 ; ...
(1)assign 语句中变量需要定义成wire型,使用wire必须搭配assign (2)元件例化时候的输出必须用wire .out(dout) (3)input、output和inout的预设值都是wire 寄存器(reg)用来表示存储单元,它会保持数据原有的值,直到被改写。 寄存器不需要驱动源,也不一定需要时钟信号。在仿真时,寄存器的值可在任意时刻通过赋值操作进...
We use a second if statement to model the behaviour of the multiplexor circuit. This is an example of a nested if statement in verilog. When the addr signal is 0b, we assign the output of the flip flop to input a. We use the first branch of the nested if statement to capture this...
assign Dbus = {Dbus [3:0], Dbus [7:4]}; //高4 位与低4 位交换。 由于非定长常数的长度未知, 不允许连接非定长常数。例如,下列式子非法: {Dbus,5} //不允许连接操作非定长常数。 条件语句 if 语句的语法如下: if(condition_1) procedural_statement_1 ...
always @(*)beginif(condition)begin out=x;endelsebegin out=y;end end 这与下面使用条件运算符连续赋值的语句是等价的: 代码语言:javascript 代码运行次数:0 运行 AI代码解释 assign out=(condition)?x:y; 但是,过程if语句使用不当可能会引入新的错误,只有out在所有的条件下都被赋值才会生成正确的组合电路,...
If statement Always if 一、问题描述 Build a 2-to-1 mux that chooses between a and b. Choose b ifbothsel_b1 and sel_b2 are true. Otherwise, choose a. Do the same twice, once using assign statements and once using a procedural if statement. ...