exposed. We prefer adding the gel after this step to not accidentally remove it when taking off the sticker liner afterwards. Add a lentil-sized amount of electrolyte to each individual electrode pad using the syringe. We use Abrasiv Plus from OneStep, but other electrolytes should work as ...
Although the injection pressure is likely to alter the properties of emulsions, this effect on the spray flow puffing and micro-explosion has not been reported. To investigate this, we injected a fuel spray using a microsyringe needle into a high-temperature environment to investigate the droplets...
The remaining molybdenite particles were thoroughly washed with deionized water thrice to make the suspension clear enough for photo collecting. In the attaching process, an air bubble of 2.5 ± 0.1 mm in diameter was generated at the end of a capillary tube on a syringe, which was placed 4 ...
Materials 2018, 11, 927 3 of 13 The silica/PVP composite nanofibers were firstly prepared from the ES solution by the ES technique at a flow rate of 0.9 mL/h using a 24-G plastic syringe with a stainless steel needle. The voltage applied was 16 kV, and the distance from a 12 × ...
The microneedle was loaded via the unpulled end with sterile water, using a syringe and hypodermic needle and capillary sealant was used on the unpulled opening to prevent flow or evaporation in the microneedle. A sample chamber was made by placing an adhesive vinyl spacer (80 µm thick, ...
Water was used as probe liquid, and for each specimen, drops of 3 µL were deposited using a syringe (50 µL) onto the nanocomposite film surface. The error analysis was obtained by the standard deviation of at least five independent determinations. Permeation measurements were performed in...
Search or jump to... Search code, repositories, users, issues, pull requests... Provide feedback We read every piece of feedback, and take your input very seriously. Include my email address so I can be contacted Cancel Submit feedback Saved searches Use saved searches to filter your...