Set jumpers as Fig.5and install R15&R16will allow the development board have USB feature.This is similar to Arduino boards.4)Make Use All I/O Ports Referring to schematic removing R3,R4,R7,R11,R12,R15,and R16will make all I/O pins free from interference.5.Assembly Drawing See Fig.7...
AsProgrammer dregmod allow you to program flash memory on the protocols spi, I2C, MicroWire. Supports Buzzpirat, Bus Pirate, CH341a, CH347, UsbAsp, AVRISP(LUFA), Arduino & FT232H - therealdreg/asprogrammer-dregmod
Hi! I go this strange error and AFAIK I've never seen this before. I'm trying to upload code to an ATmega324PB (MightyCore) and have the following platformio.ini file ; ENVIRONMENT SETTINGS [env:MightyCore] platform = atmelavr framework ...
Connect your favorite programmer to the header of USB ISP referring to the pinout on the case of the device. If you don't have one around, then use an Arduino with ArduinoISP example running on it. It is supported by avrdude as avrisp. Be sure to set baud rate to 19200. Upload the...