snps,usb3_lpm_capable; phy-names = "usb3-phy"; phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; phy-names = "usb3-phy"; phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; }; &dwc3_1 { status = ...
static inline bool rkusb_usb3_capable(void) { return false; } #endif #ifdef CONFIG_USB_DWC3_GADGET bool dwc3_gadget_is_connected(void); #endif /* Wait at maximum 60 seconds for cable connection */ @@ -91,6 +125,8 @@ static inline int rkusb_do_check_parity(struct fsg_common *...
unsigned connected:1; unsigned lpm_capable:1; }; 我们发现这些bind就是一个目的,初始化struct usb_composite_dev结构,使其逐渐丰满。因为这个结构代表一个USB设备。 经过合适的初始化后设备才能正确的工作。经过重重初始化,三层总算整合在了一起了。这三层最终形成了一个饱满的 struct usb_composite_dev结构。这个...
I recently got a pi 3 with the 7" touch screen. I set it up with berryboot and installed jessie. I got to were I needed to use a keyboard and that is when I found out the usb ports didn't work.I went through the following link to try to fix it but nothin
This I2C interface is capable of operating only as I2C master; therefore, it may be used to communicate with other I2C slave devices. For example, CX3 may boot from an EEPROM connected to the I2C interface, as a selectable boot option...
used for link power management. The first three are requests to enter the respective power levels. LAU acknowledges an LGO_Ux request, and LXU rejects it. LPMA acknowledges LAU (it's a three-way handshake, but the power level transition works even if the LPMA is lost, only slightly ...
Power management handshakes, consisting of certain Link Command Packets: LGO_Ux, LAU, LXU and LPMA. Discussed briefly onthis page, andin more detail here. Port Configuration / Port Configuration Response handshake, consisting of Header Packets, which are subject to the Header Packet’s flow mecha...
(HNP) • 8 bidirectional endpoints • 16 host channels with periodic OUT support • Software configurable to OTG1.3 and OTG2.0 modes of operation • USB 2.0 LPM (Link Power Management) support • Internal FS OTG PHY support • External HS or HS OTG operation supporting ULPI in SDR...
(HNP) • 8 bidirectional endpoints • 16 host channels with periodic OUT support • Software configurable to OTG1.3 and OTG2.0 modes of operation • USB 2.0 LPM (Link Power Management) support • Internal FS OTG PHY support • External HS or HS OTG operation supporting ULPI in SDR...
All GPIOs are high-current-capable and have speed selection to better manage internal noise, power consumption and electromagnetic emission. The I/O alternate function configuration can be locked if needed by following a specific sequence in order to avoid spurious writing to the I/Os registers. ...