/sys/power # [ 940.576199] msm_otg 78d9000.usb: phy_reset: success [ 940.686731] msm_otg 78d9000.usb: USB exited from low power mode [ 940.698794] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received [ 940.704699] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT receive...
atomic_set(&dev->in_lpm, 1);//设置处于low power mode的标记 ... } /*上面是进入low power mode,下面看下退出low power mode的实现*/ static void msm_otg_resume_w(struct work_struct *w) { struct msm_otg *dev = container_of(w, struct msm_otg, otg_resume_work); unsigned long timeout...
IOCTL_UCMTCPCI_PORT_CONTROLLER_ALTERNATE_MODE_EXITED 通知客户端驱动程序退出备用模式,以便驱动程序可以执行其他任务。 IOCTL_UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_CONFIGURED 通知客户端驱动程序,合作伙伴设备上的 DisplayPort 备用模式已配置了固定分配,以便驱动程序可以执行其他任务。 IOCTL_UCMTCPCI_PORT_CONTROLLER_DISPL...
Note: Low-power mode is exited by asserting the STP pin high. PLL is started immediately, and when the clock becomes stable, it is passed on the output of the CLK pin. Then, after a minimum of 5 clock cycles, DIR is deasserted and Low-power mode is exited. The SuspendM bit is ...
[1]: dhcpcd.service: main process exited, code=killed, status=11/SEGV May 16 16:35:41 raspberrypi dhcpcd[13144]: sending signal TERM to pid 514 May 16 16:35:41 raspberrypi dhcpcd[13144]: dhcpcd not running May 16 16:35:41 raspberrypi dhcpcd[13144]: dhcpcd[13144]: sending signal ...
* Fixed a crash that occurs if the client is exited immediately after starting 3.5.3 (29th March 2016)---* Added support to hide other connected client details using the server HideClientInfo=1 config.ini parameter* Updated openssl to 1.0.1s 3.5.2 (17th March 2016)...
Diese Struktur wird in der IOCTL_UCMTCPCI_PORT_CONTROLLER_ALTERNATE_MODE_ENTERED-Anforderung verwendet. UCMTCPCI_PORT_CONTROLLER_ALTERNATE_MODE_EXITED_IN_PARAMS Speichert Informationen zum alternativen Modus, der beendet wurde. Diese Struktur wird in der IOCTL_UCMTCPCI_PORT_CONTROLLER_ALTERNATE_MODE_...
Process: 943 ExecStart=/sbin/upsd (code=exited, status=0/SUCCESS) Main PID: 946 (upsd) Tasks: 1 (limit: 2233) Memory: 2.0M CGroup: /system.slice/nut-server.service└─946 /lib/nut/upsd Jan 12 15:54:47 ubuntuserver systemd[1]: Starting Network UPS Tools - power devices information...
TUSB1210 can be disabled or configured in low power mode for energy saving. TUSB1210 is protected against accidental shorts to 5 V or ground on its exposed interface (DP/DM/ID). It is also protected against up to 20 V surges on VBUS. TUSB1210 integrates a high-performance low-jitter ...
Mode at 250 MHz – Compliant With PHY Interface for the USB Architectures (PIPE), Version 3.0 – ULPI to Link-Layer Controller – Supports 8-Bit SDR Mode at 60 MHz – Supports Synchronous Mode and Low-Power Mode – Compliant With UTMI+ Low Pin Interface (ULPI) Specification, Revision 1.1...