(至少有一个报表描述符)*/ 0x22, /* bDescriptorType 报告描述符 */ CUSTOMHID_SIZ_REPORT_DESC, /* wItemLength: Total length of Report descriptor 报告描述符大小 */ 0x00, /* 标志类别描述符说明结束 */ // // 端点1描述符 // /*** Descriptor of Custom HID endpoints ***/ /* 27 */ 0...
USB 基本知识USB的重要关键概念: 1、端点:位于USB设备或主机上的一个数据缓冲区,用来存放和发送USB的各种数据,每一个端点都有惟一的确定地址,有不同的传输特性(如输入端点、输出端点、配置端点、批量传输端点) 2、帧:时间概念,在USB中,一帧就是1MS,它是一个独立的单元,包含了一系列总线动作,USB将1帧分为好几...
端点(Endpoint),可以认为是一个单向数据信道的抽象,因此端点描述符中包括传输的速率和带宽等信息,如下所示: /* USB_DT_ENDPOINT: Endpoint descriptor */structusb_endpoint_descriptor{__u8bLength;__u8bDescriptorType;// 0x05__u8bEndpointAddress;//端点地址__u8bmAttributes;// 端点属性__le16wMaxPacketSize...
value was// obtained in a previous call to WdfUsbTargetDeviceQueryUsbCapability// that determined whether or not static streams is supported and// retrieved the maximum number of streams supported by the// host controller. The device context stores the values for IN and OUT// endpoints.//...
/* array of desc.bNumEndpoint endpoints associated with this * interface setting. these will be in no particular order. */ struct usb_host_endpoint *endpoint; char *string; /* iInterface string, if present */ } usb_interface_descriptor 结构体 ...
The endpoints on a device are grouped into functional interfaces, and a set of interfaces makes up a device configuration. For more information, see USB device layout. The host software can look at endpoint information, before the device has been configured or during selection of an alternate se...
前阵子调试平台的mass-storage function, 想借机把USB Initialization过程了解清楚. 以前的理解都是基于代码的, PC机那边会怎么响应完全是黑盒, 不可见的. 而在初始化过程中不能加入break point, 否则请求超时后, 即使单步调试最后把请求的数据发回, 也被主机认为初始化失败. 因此只能在endpoint的XmitData和ReceiveDa...
endpoints[1]; let dataUint8Array : Array<number> = new Uint8Array(1024); usb.bulkTransfer(pipe, inEndpoint, dataUint8Array, 15000).then((dataLength : number) => { if (dataLength >= 0) { console.info("usb readData result Length : " + dataLength); } else { console.info("usb read...
/* NOTE: these two are _only_ in audio endpoints. */ /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ __u8 bRefresh; __u8 bSynchAddress; } __attribute__ ((packed)); #define USB_DT_ENDPOINT_SIZE 7 #define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ ...
本主题介绍客户端驱动程序如何生成 USB 请求块 (URB) 以在 USB 设备中向/从常时等量终结点传输数据。 通用串行总线 (USB) 设备可以支持常时等量终结点,以稳定速率传输依赖于时间的数据,例如音频/视频流。 若要传输数据,客户端驱动程序会发出请求,以将数据读取或写入常量终结点。 因此,主机控制器启动常时等量传输...