My previous Lenovo X1 laptop running Windows 10 worked fine with the same cable and the same router. Solution: I installed the latest Silicon Labs CP210x Universal Windows driver v 11.2 to my Windows 11 laptop. Setup: Cisco IR1101 (IOS XE 17.3.1) --- blue console cable --- Window...
That is the driver I tried. The problem is that the cable uses a chip that is a counterfeit of the OEM chip. The driver detects this and will not run.Top adafruit2 Posts: 22735 Joined: Fri Mar 11, 2005 11:36 pm Re: USB-TTL Cable for Windows 10 Post by adafruit2 » Fri ...
Uninstall the driver of keyboards. Click the arrow next to[Keyboards]③, then right-click the[keyboard name]④and select[Uninstall device]⑤. Click[Uninstall]⑥. Remove all devicesin the keyboards category, then restart the device. The driver will be automatically installed after the device resta...
Check USB Cable: Use a different USB cable Inspect for visible damage Test cable with another device Test on Another Computer: Connect your USB device to a different computer If it works elsewhere, the issue is with your system If it doesn’t work anywhere, the device may be faulty ...
Plug in the USB-Blaster II cable. Go to the Windows device manager (right-click on start button), look for "other hardware". There are two devices, the console interface and the JTAG interface, Both labeled Blaster-II. Right click on each and "update driver". Select "Browse for ...
Update drivers: After installation, check for and install any available driver updates for your hardware. Activate Windows: If you didn’t enter a product key during installation, you’ll need to activate Windows 11 after the installation is complete. ...
1 x USB 3.0 cable 1 x DVI/VGA passive adapter 1 x CD Driver 1 x 12V/4A (20W) power adapter a quick-install guide. Comes with a 1-year limited parts and labor warranty. Price: $89.95 PlugableAmazon 3 Surface Docks Maximize the potential of your Surface devices with the Surface Dock...
The correct driver should install automatically for Windows 10 and above the first time the workstation is connected to the Netgate® appliance. It may take up to 3 minutes for the driver to install. Connect a USB Cable¶ Next, connect to the console port using the cable that has a US...
I have been using your USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi (PID: 954) successfully for a while now but after recently upgrading to Windows 10 it now reports a driver error: This device cannot start. (Code 10). A device which does not exist was specified....
Connect the platform cable. Now go to device manager in Windows, right click on “Platform USB” and select “Uninstall”.Step 2:When the uninstall window pops up, check the box that says “Delete the driver software for this device.” Click OK....