@mariusgreuel's Avrdude fork for windows supports COM port discovery via USB VID/PID. This is actually very neat if you're using a UART-based programmer that has a tendency to bump the COM port number. I have a similar issue on my mac as well; The serial port (/dev/cu.*) gets a...
This reference design is an integrated USB Type-C® power delivery (PD) and charging reference design for 4- to 10-cell batteries for applications such as, power tool charger with USB Type-C port, vacuum cleaners, portable power station and more. Using the TPS25751, a highly integrated US...
• The Smart USB-WLAN Adapter (also referred to as WLAN module) is a module connected to the USB port on a PV device to implement local device maintenance through the WLAN and mobile app. For details about the applicable device models, version mapping, and operations on the devices,...
Connect the USB flash drive to the USB port on the SmartLogger. Log in to the app as installer, choose More > Upgrade, select a single device or multiple devices of the same type, and tap Next. Select the upgrade package and tap Next. Confirm the upgrade package and the device to be...
In Windows 8, when such failures occur, the General tab in Device Manager displays a USB-specific error message that indicates the reason for failure.The error strings are as follows:A request for the USB device descriptor failed. The USB set address request failed. A USB port reset request...
You can disable the USB Selective Suspend feature as a workaround by editing the registry. The USB device may become unresponsive because of a race condition in the Selective Suspend feature. The Selective Suspend feature suspends the USB device to efficiently maintain battery power by enabling the...
These cables are not quite as common and versatile as the others on this list. USB Type-B connectors are primarily for connecting printers and scanners to computers. They have a square shape with beveled exterior corners on the top ends. You might still find a USB Type-B port on some dev...
The OTG (On The Go) connector is intended solely as a maintenance port on Aetina products. It should not be used as a standard USB-C port because it is dedicated to performing System Installation or BSP and Patch Flashing operations only....
local USB devices. USB Network Gate allows you to work with any local USB devices even while in a remote session. Moreover, you can set your remote machine to automatically detect and connect to shared USB devices momentarily, as if you just plugged the device in a remote machine physically...
* <31> :: data capable as a USB host * <30> :: data capable as a USB device * <29:27> :: product type * <26> :: modal operation supported (1b == yes) * <25:16> :: Reserved, Shall be set to zero * <15:0> :: USB-IF assigned VID for this cable vendor */ #defi...