USB设备通过USB总线定期发送数据,在Windows上使用Wireshark,我可以看到这种通信是"URB_INTERRUPT in“消息,最后几个字节 浏览9提问于2020-01-25得票数 1 1回答 按下键盘上的每个键后,usb设备断开连接 、、、 , bInterval = 10#define DEBUG#include <linux/slab.h>#include <linux/init.h>#include <linux ...
int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout) int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout) 上面三个接口函数都已经将之前提到过的申...
12.59 * If the driver want to use this urb for interrupt, control, or bulk 13.60 * endpoints, pass '' as the number of iso packets. 14.61 * 15.62 * The driver must call usb_free_urb() when it is finished with the urb. 16.63 */ ...
#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */ #define URB_FREE_BUFFER 0x0100 /* Free transfer buffer with the URB */ #define URB_DIR_IN 0x0200 /* Transfer from device to host */ #define URB_HCD_DRIVER_TEST 0xFFFF /* Do NOT hand back or free this U...
usb.h) (_URB_BULK_OR_INTERRUPT_TRANSFER 结构 发现 产品文档 开发语言 主题 此主题的部分內容可能由机器或 AI 翻译。 消除警报 通用串行总线 (USB) Ucmmanager.h Ucmtcpcidevice.h Ucmtcpciglobals.h Ucmtcpciportcontroller.h Ucmtcpciportcontrollerrequests.h...
59 * If the driver want to use this urb for interrupt, control, or bulk 60 * endpoints, pass '' as the number of iso packets. 61 * 62 * The driver must call usb_free_urb() when it is finished with the urb. 63 */ 64structurb *usb_alloc_urb(intiso_packets, gfp_t mem_flags...
usb_[interrupt|control|bulk]_msg( struct usb_device * usb_dev, unsignedint pipe, void * data, int len, int * actual_length, int timeout ) 创建一个URB 之后提交,如果没有成功则会一直等待。该函数不需要传递回调函数地址,一个通用的完成回调函数将会实现此功能。也不需要另外创建和初始化,因为这个...
例如,假設驅動程式呼叫UsbBuildInterruptOrBulkTransferRequest來初始化 URB 以進行大量傳輸要求, (請參閱_URB_BULK_OR_INTERRUPT_TRANSFER)。 如果驅動程式將URB結構的TransferBufferMDL成員初始化為 Null,USB 驅動程式堆疊會使用傳輸緩衝區指定的TransferBuffer,在 中與裝置交換資料,而不是 MDL。 不過,在內部,USB 驅動...
#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */ #define URB_FREE_BUFFER 0x0100 /* Free transfer buffer with the URB */ #define URB_DIR_IN 0x0200 /* Transfer from device to host */ #define URB_HCD_DRIVER_TEST 0xFFFF /* Do NOT hand back or free this ...
如果緩衝區是在 transferBuffer中提供緩衝區,則描述常駐緩衝區的 MDL 指標NULL。 緩衝區的內容取決於TransferFlags的值。 如果指定USBD_TRANSFER_DIRECTION_IN,描述的緩衝區將會包含從主機控制器驅動程式傳回時從裝置讀取的數據。 否則,緩衝區會包含驅動程式提供的數據傳輸至裝置。 此 MDL 必須從非分頁集區配置。