2 交换机上面有两种配置方式可以达到此效果方法一：路由器配置：新建2个vlan 3 建立相应的dhcp 4 交换机配置：新建2个vlan 5 将eth3口做成trunk和路由器相连 6 将eth5口的vlan2做成untagged，pvid设置为2 7 将eht5口的vlan3做成tagged 8 此时UAP可以获取到192.168.2.0/24网段的地址，并且可以用控制器管理 ...
与是否重定向(至来宾门户)没有关系。若WLAN 配置了VLAN,则流量离开AP 时会加标记。不过, 您必须考虑如何将标记的流量转发到应去的地方。 下面是一个示例: My management network: 10.0.0.0/24 Guest VLAN network: 15.0.0.0/24 Switch: AP connected to port 5 (vlan1-untagged and vlan5-tagged) ...
The UniFi switch is managed over the untagged network, so the port/device it is connected to needs to have VLAN 1 untagged/set as native or PVID (as you want to manage it over 1). The UniFi switch will pick up an IP from whatever the untagged/native VLAN is. If the switch is adop...
Disconnect the WAN port on the shadow gateway and mirror the primary's WAN cabling. If your ISP only provides a single uplink connection, then use either a UniFi switch with a dedicated untagged / native VLAN or an unmanaged switch to split the ports. Mirror the primary gateway's LAN cabl...
(vlan10_mgmt,vlan20_user,vlan30_finance,vlan40_guest)在4个不同的VLAN id(10、20、30、40)。使事情更复杂一点,我们不使用默认的VLAN 1,但设置VLAN 10未加标签的携带UniFi AP流量管理。它应当相当容易为使用者改变管理VLAN从VLAN 10恢复到默认VLAN 1。最后,一个UAP可以插到任何这些交换机提供无线连接。
And it would be tagged on your port connected to your AP. If your port is only connected to 1 nic on your host that is only connected to the vlan vswitch - then you would just have it set to 0 as the ID, and your switch port would be untagged.. If this port is only going to...
As this is the “Default” network, it will automatically be configured on all switch ports. The out of the box settings have switch ports that are set to the “default” network and also allow tagged traffic. Any untagged traffic will be assigned to VLAN 1, the native VLAN. The “Store...
I found out that i have tagged this wifivlan to the edgerouter also (not untagged in any edgeports). When i removed it from from the trunkport in edgerouter i cant see it anymore. I dont use my wifi-vlan through this switch anyway. It goes through another mini flex switch, strange i...
As this is the “Default” network, it will automatically be configured on all switch ports. The out of the box settings have switch ports that are set to the “default” network and also allow tagged traffic. Any untagged traffic will be assigned to VLAN 1, the native VLAN. The “Store...