UniFi – Guest Network, Guest Portal, and Hotspot System – Ubiquiti Networks Support and Help Center Howto setup the Unifi Guest Portal 日志发送 如果家中有 NAS,可以打开 UniFi 的日志发送功能,将日志信息发送到 NAS 中长期保存。部分 NAS 系统,例如DSM,已经内置了 Syslog 服务器,能够集中收集和查看各个...
在桥接接口上创建VLAN接口。 /interface vlan add interface=LAN name=IoT vlan-id=10 add interface=LAN name=Guest vlan-id=30 add interface=LAN name=Main vlan-id=50 分配IP地址 为每个VLAN接口分配IP地址。 /ip address add address=192.168.10.1/24 interface=IoT add address=192.168.30.1/24 interface=...
The “Store-Guest “ Network corresponding to VLAN 3 will be used for Guest Wi-Fi, there should be no requirement for physical switch ports. This setup shown in the table and diagram below: SSID / VLAN / Network Mapping Table SSIDDevices Types:**VLAN ID **Network NamePort Type Store Emp...
I have a unifi AP setup in standalone mode with a PFSense Router. I want to setup a VLAN Tagged Network with no wireless password (for a guest network). Issue is, it doesn't seem like I'm allowed to setup an open network? This is what i see: Anyone tried to do this before? se...
Device Configuration: Easily configure network settings, SSIDs, VLANs, and more. Monitoring and Analytics: Real-time monitoring of network performance and device health. Guest Portal: Create customizable guest portals with authentication and voucher support. Multi-Site Management: Manage multiple sites ...
I plan to use the DD-WRT to setup a VLAN for my iot devices (both a lan port and WiFi SSID), a guest WiFi network, and my normal WiFi network. I also have a UniFi AP AC Pro that I want to use for an access point and that will output the 3 different WiFi networks. So I ...
i just was setting up a guest wifi on my unifi-controller (on a ubuntu machine). The basic guest-setup worked properly and i got an DHCP IP adress from my normal subnet (192.168.1.1). But i want to separate guest-access to my home-network, so i tried to setup a VLAN with an DHC...
Vlans- WLC (90), APS (91), Cams (92). Guest (100), Admin (101) Connect the bridge (trunk) to the 3560 and use a trunk (prob 2 to give better BW) to connect the 2811 to the 3560. The APs and cameras will both be on access ports. I was thinking it would be as simple...
• Guest Select this option to enable guest access policies on this wireles work. Advanced • VLAN To use a VLAN, select UseVLAN ID and enter the port number. • Name En descriptive user group name. • Hide Select this option if you don’t want the to be broadcast. • ...
shared-network-name net_LAN_eth1_192.168.1.0-24 { authoritative enable description vlan1 subnet 192.168.1.0/24 { default-router 192.168.1.1 dns-server 192.168.1.1 domain-name localdomain lease 86400 start 192.168.1.6 { stop 192.168.1.254 ...