/ip address add address=192.168.10.1/24 interface=IoT add address=192.168.30.1/24 interface=...
Locate, Reboot, Restore to factory default 四个功能;Set Inform(通知):用于将该 UAP 通知到指定 IP 地址的 UniFi 控制器(Controller) 上去. 选择该功能后, 只需要在 Set Inform URL 栏中, 将 "unifi" 字段更换为控制器的 IP 地址即可, 该地址可以是2层或者3层(即云端控制器) IP 地址. 默认上如果控制...
You can SSH to the AP and edit the config file there to include a line for the unifi controller. You can add a host override forunifiin the pfSense DNS resolver and set that for the address of the controller. The AP will try to resolve it and then find the controller as long as yo...
TL-ER3220G..TL-ER3220G硬件版本V4.0 软件版本也是V4,下面链接unifi ap后,ap能获取到IP,但下面通过WIFI连接的设备获取不到IP,指定IP后可以上网,AP用了几个月了,一直很稳定,只是新
obtain an IP address as well as for the wireless Access The UniFi AP-Pro works with the UniFi AP, AP-LR, AP-Mini, Points after the deployment) AP-Outdoor, and AP-Outdoor 5G. It ludes the UniFi • A management station computer running the UniFi Controller software, which allows you...
willcollectivelyrefertoasUniFiAP.Additionalinformation obtainanIPaddressaswellasforthewirelessAccess abouttheAPmodelsisavailableonourwebsiteat /UniFiPointsafterthedeployment) •AmanagementstationcomputerrunningtheUniFi Model2.4GHz5GHzControllersoftware,locatedeitheronsiteandconnected ...
我查了一下,RA 的源 IPv6 地址应该是链路本地地址。路由器发送的 RA 报文,地址不合法。 💡 Info根据RFC 4861 的4.2 章节,Router Advertisement 报文的源 IPv6 地址必须是链路本地地址: Source Address MUST be the link-local address assigned to the interface from which this message is sent. 这时我怀...
* Register the inet handler; it notifies us for changes in the IP address. */uf_register_inet_notifier();#endif/* CSR_SUPPORT_SME */unifi_notice(priv,"unifi%d is %s\n", priv->instance, priv->netdev[interfaceTag]->name);return0; ...
但是在 MikroTik 设备上,我一般不这么做,我的选择是将所有网络都打上 VLAN Tag,那么这就将会成为第一个难点了,我如何将Unifi AP 的管理网络修改成为我需要的 VLAN ID 呢?那么就请继续往下看。 2.3.2. VLAN 规划 这里是安排 5 个网络:Default、Proxy、IoT、Guest、NFS ...
set_debug() set_device_settings_base() set_dynamicdns() set_element_adoption() set_guestlogin_settings() set_guestlogin_settings_base() set_ips_settings_base() set_is_unifi_os() set_locate_ap() (deprecated but still available as alias) ...