ntp unicast-peer命令用来配置NTP对等体模式。 undo ntp unicast-peer命令用来取消NTP对等体模式。 缺省情况下,未配置NTP对等体模式。 命令格式 ntp unicast-peer ip-address [ version number | authentication-keyid key-id | maxpoll max-number | minpoll min-number | preempt | source-interface interface-typ...
keepalived官网解释 # default IPforbinding vrrpd is the primary IP # on interface. If you want to hide the location of vrrpd, # use this IP as src_addrformulticast or unicast vrrp # packets. (since it's multicast, vrrpd will get the reply# packet no matter what src_addr is used). #...
unicast_src_ip 192.168.1.1 # 本节点IP地址 unicast_peer { 192.168.1.2 # 其他节点IP地址 192.168.1.3 } } ``` ### 步骤四:重启keepalived服务 在每个节点上保存配置文件后,重新启动keepalived服务以使更改生效: ```bash sudo systemctl restart keepalived ``` 通过以上操作,我们已经成功配置了"keepalived u...
virtual_router_id55priority95advert_int1# nopreempt unicast_src_ip172.20.47.5unicast_peer{172.20.47.4}authentication{ auth_type PASS auth_pass12345678}virtual_ipaddress{172.20.47.202}track_script{ chk_nginx } }
mcast_src_ip 发送多播包的地址，如果不设置默认使用绑定网卡的primary ip unicast_src_ip xx.xx.xx.xx unicast_peer { xx.xx.xx.xx } Unsafe permissions found for script '/etc/keepalived/check_mysql.sh'.SECURITY VIOLATION - scripts are ...
注意事项 配置undo default ipv4-unicast命令后,创建的BGP如果要使能IPv4单播地址族,需要用peer enable命令使能。 使用实例 # 使能所有邻居的IPv4单播地址族。 <HUAWEI> system-view [HUAWEI] bgp 100 [HUAWEI-bgp] default ipv4-unicast翻译 收藏 下载文档 ...
51CTO博客已为您找到关于unicast_peer的相关内容,包含IT学习相关文档代码介绍、相关教程视频课程,以及unicast_peer问答内容。更多unicast_peer相关解答可以来51CTO博客参与分享和学习,帮助广大IT技术人实现成长和进步。
mcast_src_ip 发送多播包的地址,如果不设置默认使用绑定网卡的primary ip 如果两节点的上联交换机禁用了组播,则只能采用vrrp单播通告的方式 ### unicast_src_ip xx.xx.xx.xx unicast_peer { xx.xx.xx.xx } ### 关于keepalived监测脚本的WARNING:
To delete all entries in the IPv6 neighbor discovery cache, except static entries, use the clear ipv6 neighbors command in privileged EXEC mode. Syntax for Releases 15.0(1)M, 12.2(33)SXH, and 12.2(33)SRC, and Later Releases clear ipv6 neighbors [interface type number [ipv6 ipv6-address...
3.1.1. Bulk Transfer Applications Applications that perform bulk transmission of data to a peer over UDP, i.e., applications that exchange more than a small number of UDP datagrams per RTT, SHOULD implement TCP-Friendly Rate Control (TFRC) [RFC5348], window-based, TCP-like congestion ...