UFS_UTILS Utilities for the NCEP models. This is part of the Unified Forecast System project. Documentation for chgres_cube and other utilities can be found at https://noaa-emcufs-utils.readthedocs.io/en/latest/. Complete documentation can be found at https://ufs-community.github.io/UFS_UTI...
E.g.: getting help for ufs flags Run: ./ufs-utils fl --help Output: Flags command usage: ufs-utils fl [-t] <flag idn> [-a|-r|-o|-e] [-p] <device_path> -t Flags type idn Available flags and its access, based on UFS ver 3.0 : 0 : Reserved 1 : fDeviceInit | Read |...
用户可以选择在系统重新/安装期间加密其 /home 目录。 可以通过安装 ecryptfs-utils 软件包,然后使用可用方法之一启动加密来手动激活 eCryptfs(在 ecryptfs-setup-private 配置工具和其他工具的帮助下,在特定系统的帮助下运行 mount 命令以及 -t 标志和 encryptfs 选项)。 在受支持的 NAS 设备上,可以通过在创建/编辑...
可以通过安装 ecryptfs-utils 软件包,然后使用可用方法之一启动加密来手动激活 eCryptfs(在 ecryptfs-setup-private 配置工具和其他工具的帮助下,在特定系统的帮助下运行 mount 命令以及 -t 标志和 encryptfs 选项)。 在受支持的 NAS 设备上,可以通过在创建/编辑给定文件夹时选中相应的复选框来加密新的或现有的共享...
工具UFS-utils 读取/dev/BSG/UFS-BSG 并正常获取配置信息。 但没有像 sda 和 sdb 这样的块设备。 请确认主板是否与 sda 和 sdb 设备集成;如果没有,是否可以通过外接卡连接到主板,以及需要哪些接口外围设备。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/922975/...
ufs-utils:已创建UFS工具项目,以允许从用户空间访问UFS设备,并执行UFS基本操作集 UFS工具版本1.9 描述: a)使用Linux内核中的BSG基础结构读取/写入设备标志,属性和描述符(适用于5.1 rc1) 由于UFS BSG驱动程序中的问题,必须应用以下修补程序: b)获取/设置UNIPRO属性c)HMR-主机手动刷新功能以下选项可能适用于SCSI BSG...
rpm -qa|egrep “nfs-utils|rpcbind” 第二个里程:进行软件服务安装 yum install -y nfs-utils rpcbind 补充说明:nfs-utils 和 rpcbind两个软件大礼包 rpm -ql nfs-utils查看安装了什么 /etc/rc.d/init.d/nfs /usr/sbin/showmount rpm -ql rpcbind ...
smp_utils(8) smp_write_gpio(8) smp_zone_activate(8) smp_zone_lock(8) smp_zone_unlock(8) smp_zoned_broadcast(8) smpdump(8) smpinfo(8) smpquery(8) smrsh(8) smtp-notify(8) smtp(8) smtpd(8) snmp-notify(8) snmpd(8) snmptrapd(8) snoop(8) snort(8) soconfig(8) spawn(8) ...
sg3_utils(8) sg_bg_ctl(8) sg_compare_and_write(8) sg_decode_sense(8) sg_format(8) sg_get_config(8) sg_get_elem_status(8) sg_get_lba_status(8) sg_ident(8) sg_inq(8) sg_logs(8) sg_luns(8) sg_modes(8) sg_opcodes(8) sg_persist(8) sg_prevent(8) sg_raw(8) sg_...
name = "pin-utils" version = "0.1.0" source = "registry+https://github.com/rust-lang/crates.io-index" checksum = "8b870d8c151b6f2fb93e84a13146138f05d02ed11c7e7c54f8826aaaf7c9f184" [[package]] name = "pkg-config" version = "0.3.30" source = "registry+https://github...