(.text+0x17): undefined reference to`udev_device_get_action'/usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libusb-1.0.a(libusb_1_0_la-linux_udev.o): In function`udev_hotplug_event': (.text+0x3d): undefined reference to`udev_device_get_devnode'/usr/lib/gcc/i686-linu...
(.text+0x7bf): undefined reference to `udev_device_get_sysname' /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libusb-1.0.a(libusb_1_0_la-linux_udev.o): In function `linux_udev_scan_devices': (.text+0x81f): undefined reference to `udev_device_unref' /usr/lib/gcc...
深入class_device_create函数内部,分析函数调用情况: class_device_create class_device_register class_device_addkobject_uevent(&class_dev->kobj, KOBJ_ADD); kobject_uevent_env/*action_string = "add"*/action_to_string(KOBJ_ADD);/*add*//* environment values *//* 分配保存环境变量的内存 */buffer...
walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/pci0000:00/0000:00...
cleanup_device_parent(dev); if (parent) put_device(parent); goto done; } 上面的代码段为我们常见的添加注册设备时的会调用到的接口,device_add()函数,删除了一些无关代码,可以看出,是先调用了 kobject_add()创建添加该内核对象,然后调用kobject_uevent()来通知系统uevent的变化,这里的action是 KOBJ_ADD,...
ACTION: 事件 (uevent) 的行为,例如:add( 添加设备 )、remove( 删除设备 )。 KERNEL: 内核设备名称,例如:sda, cdrom。 DEVPATH:设备的 devpath 路径。 SUBSYSTEM: 设备的子系统名称,例如:sda 的子系统为 block。 BUS: 设备在 devpath 里的总线名称,例如:usb。
udev_device_get_action() function is used). And given we'll release with a kernel that breaks the assumptions this code makes, it really should be RC - but I'm not going to niggle over severity right now. The symptom that first got my attention was that setting the SYMLINK ...
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="xxxx", ATTR{idProduct}=="yyyy", MODE="0666", SYMLINK+="mydevice" 这条规则表示当一个新的 USB 设备被添加(ACTION=="add")且其厂商 ID 为xxxx和产品 ID 为yyyy时,udev应该将设备节点的权限设置为0666(即所有用户都可以读写),并创建一个名为...
*/ACTION=="add",SUBSYSTEM=="scsi_device",RUN+="/sbin/modprobe sg" 在修改udev配置之前,我们通常的考虑是:不要修改系统预置的规则,特别是那些影响非常广泛的配置,比比如上面例子中的第一行。我们正确的做法应该是在/etc/udev/rules.d/下创建一个新的规则文件,并确定该文件的文件名包含的数字序列应该比标准...
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="1234", ATTR{idProduct}=="5678", SYMLINK+="my_usb_device" 将此规则文件保存为 /etc/udev/rules.d/99-my-usb.rules,然后重新加载 udev 规则: 代码语言:txt 复制 sudo udevadm control --reload-rules && sudo udevadm trigger 通过以上步骤,可以...