I am decoding UBX-RXM-SFRBX to get the satellite ephemeris, but all I get is a bunch of invalid values. (For example, the preamble specified in the GPS ICD is not written, and the subframe ID is not a valid value, even though I decoded it without the Pad.) In this case, what ...
RAWX Disable sending of the UBX-RXM-RAWX messages. SBAS Disable use of the SBAS constellation. SFRBX Disable use of the SFRBX messages. SURVEYIN Disable survey-in mode with TMODE2. TP Disable sending UBX-TIM-TP. -e OPTION Enable an option in the GPS. Accepts one parameter, OPTION, ...
UBX-RXM-SFRBX (Broadcast Navigation Data Subframe) UBX-TIM-TM2 (Time Mark Data) If your module supports them, you can also log: UBX-ESF-MEAS (External Sensor Fusion Measurements) (ADR / UDR modules only) UBX-ESF-RAW (External Sensor Fusion Raw Sensor Measurements) (ADR / UDR modules ...
"Output rate of the UBX-RXM-SFRBX message on port I2C"), ("CFG-MSGOUT-UBX_RXM_SFRBX_SPI", 0x20910235, "U1", 1, "", "Output rate of the UBX-RXM-SFRBX message on port SPI"), ("CFG-MSGOUT-UBX_RXM_SFRBX_UART1", 0x20910232, "U1", 1, "", ...
there is no way to configure RXM-RAW or TRK-MEAS etc as these aren't supported on the M8N While this topic is rightfully closed, I recently learned from uBlox press releases that the new "8MT" chip does have the raw data available and claims to support the prior message set. Look ...