可以右键点击(在Mac接触板上两只手指同时点),然后选择Unmount。如果Unmount的选项变成了灰色不给选的话,就Ctrl+Alt+T打开Terminal,然后在上面输入sudo umount /dev/sdNk(把sdNk换成你要卸载的文件系统对应的位置,例如此处可以是sudo umount /dev/sdd2。如果你不知道它的位置的话,可以在GPa
diskutil unmountDisk /dev/disk2 (这里的disk2是上一步里所找到的U盘编号) sudo dd if=ubuntu.dmg of = /dev/rdisk2 bs=2m (执行完上一步之后,会弹出“系统无法识别U盘”的警告,先不要点忽略或推出,转到terminal继续输入) diskutil eject /dev/disk2(这一步推出U盘) (执行完上一步之后,再回到警告窗口...
然后你会得到一个dmg文件 第四步: 写入镜像 停留在上一步有ubuntu.dmg的那个文件夹里, 接着插入空白 U盘,运行下列命令查看电脑上所有硬盘的序号, 记下你的u盘的序号...运行下面的命令,把N改成你U盘的序号,通常是2, 那么这里就是disk2 diskutil unmountDisk /dev/diskN 运行下面的命令,把N改成你 U 盘的...
After selecting the drive, click the Unmount Volume button in the right pane — you can’t format the device’s partition while it’s mounted. A removable storage device normally has a single partition on it, but you can create additional partitions here – for example, you could have one ...
diskutil unmountDisk /dev/diskN (replaceNwith the disk number from the last command; in the previous example, N would be 2) If you see the error "Unmount of diskN failed: at least one volume could not be unmounted", startDisk Utility.appand unmount the volume (don't eject). ...
Even though you are supposed to be able to expand an ext3 or ext4 filesystem without unmounting it first, it may be a good practice to unmount it anyway and check the filesystem, so that you don't mess up the day you want to reduce a logical volume (in that case unmounting first ...
You can find out which disk to shred using Disk Utility. It needs to be unmounted first--and for obvious reasons it won't allow you to unmount the system disk, so you're relatively safe if you perform this with a normal boot (not a LiveCD). shred is included in the Live CD so ...
Unmount the array from the filesystem: sudo umount /dev/md0 Then, stop and remove the array by typing: sudo mdadm --stop /dev/md0 sudo mdadm --remove /dev/md0 Use the following command to find the devices that were utilized to create the array: ...
• Copy the contents of the driver to the root directory using the following command: "cp -ap /tmp/dd /" 17 • Install the driver by running the following command: "/dd/pre_install" • Unmount and remove the USB flash drive by running the following command: "umount /tmp" • ...
iso-scan gnome-disk-utility clonezilla go-mtpfs disk-detect regionset udftools 7zip weresync php7.2-zipMount and unmount Iomega Zip and/or Jaz drives其他與 jazip 有關的套件依賴 推薦 建議 enhancesdebconf (>= 0.5) Debian configuration management system 或者debconf-2.0 本...