AI检测代码解析 OUTPUT_FORMAT("elf32-littlearm","elf32-littlearm","elf32-littlearm")/*指定输出可执行文件是elf格式,32位ARM指令,小端*/ OUTPUT_ARCH(arm) /*指定输出可执行文件的platform为ARM*/ ENTRY(_start) /*指定输出可执行文件的起始地址为_start*/ SECTIONS { /* 指定可执行文件(image)的全局...
a–O binary:将输出二进制镜像,即会去掉elf头 b–R .note:-R选项表示去掉镜像中指定的section,如这里会去掉.note、.note.gnu.build-id和.comment段 c–S:去掉符号表和重定位信息,它与-R选项的功能类似,都是为了减小镜像的size 因此,执行该命令后生成的Image镜像是去掉elf头,去掉.note等无用的section,以及st...
u-boot.bin:二进制可执行文件,它就是可以直接烧入ROM、NOR Flash的文件。 u-boot:ELF格式的可执行文件 u-boot.srec:Motorola S-Record格式的可执行文件 对于S3C2410的开发板,执行“make smdk2410_config”、“make all”后生成的u-boot.bin可以烧入NOR Flash中运行。启动后可以看到串口输出一些信息后进入控制界...
首先备份Petalinux工程images/linux目录下的u-boot.elf和system.dtb文件,命令如下: cd images/linux mv u-boot.elf u-boot.elf.bak mv system.dtb system.dtb.bak 然后软链接编译生成的u-boot.elf和system.dtb文件,命令如下: ln -s ~/git.d/u-boot-xlnx/u-boot.elf u-boot.elf ln -s ~/git.d/u-...
.bss (NOLOAD) : { *(.bss) . = ALIGN(4); } _end = .; } OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") /*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ OUTPUT_ARCH(arm) ENTRY(_start) ...
标为红色的是移植时比较重要的文件或文件夹。 2. U-boot代码的大致执行流程(以S3C24x0为例) 从链接脚本文件u-boot.lds中可以找到代码的起始: OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) ENTRY(_start) ...
bootelf - Boot from an ELF image in memory bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol bootvx - Boot vxWorks from an ELF image bootz - bootLinuxzImage image from memory cmp - memory compare ...
bootelf - Boot from an ELF image in memory bootm - 从内存启动应用程序 bootp - 通过使用BOOTP /TFTP协议的网络引导映像 bootvx - Boot vxWorks from an ELF image chpart - 更改活动分区 cmp - memory compare coninfo - print console devices and information ...
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") @指定输出可执行文件是elf格式,32位ARM指令,小端 OUTPUT_ARCH(arm) @设置输出可执行文件的体系架构为arm ENTRY(_start) @将_start设为入口地址 SECTIONS { . = 0x00000000; @指定可执行文件的全局入口点,通...
因此执行“make all”命令将生成u-boot,u-boot.srec,u-boot.bin,System.map 。其中u-boot是ELF文件,u-boot.srec是Motorola S-Record format文件,System.map 是U-Boot的符号表,u-boot.bin是最终烧写到开发板的二进制可执行的文件。 下面再来分析u-boot.bin文件生成的过程。ELF格式“u-boot”文件生成规则如下...