在实现了 mx_usart1_uart_init 函数后,重新编译你的项目。 检查编译输出,确认是否还存在 undefined symbol mx_usart1_uart_init 的错误。 如果错误解决,继续你的项目开发。如果仍然存在问题,可能需要检查其他配置或代码问题。 通过以上步骤,你应该能够解决编译时出现的 undefined symbol mx_usart1_uart_init 错误。
usart.c 里面主要包含了哪几个函数?A.uart_init()B.USART_GetITStatus()C.USART1_IRQHandler()D.USART_ITConfig()搜索 题目 usart.c 里面主要包含了哪几个函数? A.uart_init()B.USART_GetITStatus()C.USART1_IRQHandler()D.USART_ITConfig() 答案 AC 解析...
下面是对UART接口初始化的代码,分析其中的代码的作用。void USART1_Config(void){A.GPIO_InitTypeDef GPIO_InitStru
Re: os_printf, uart_init, iram1_0_seg overflow SOLVED #66734 By JackB - Sun Jun 04, 2017 9:43 pm At least figured out this problem...On the esp12, the blue led light is the tx pin,and so when you configure it as GPIO to flash the led as is done in the blinky example,...
31 changes: 31 additions & 0 deletions 31 pkgs/by-name/mt/mtk_uartboot/package.nix Original file line numberDiff line numberDiff line change @@ -0,0 +1,31 @@ { lib, rustPlatform, fetchFromGitHub, stdenv, darwin, }: rustPlatform.buildRustPackage rec { pname = "mtk-uartboot"; ve...
*/UART1_Init((uint32_t)115200, UART1_WORDLENGTH_8D,UART1_STOPBITS_1, UART1_PARITY_NO, UART1_SYNCMODE_CLOCK_DISABLE, UART1_MODE_TXRX_ENABLE);/* Enable the UART Receive interrupt: this interrupt is generated when the UART receive data register is not empty *///UART1_ITConfig(UART1_IT...