We would like if we could get some technical information and specifications about Thyssenkrupp PBBs mainly the apron drive series, as well as other airport ramp systems (PCA, FEGP …) that Thyssenkrupp offers. Best regards, Sento to GPU Suppliers Company Jet Aviation Zurich I need a quote for...
If the buffer is disabled, an external reference may drive this pin in the range of 1.25V to 5V. AIN2+, AIN2– (Pins 11, 10): Analog Differential Input Pins. Full-scale range (AIN2+ – AIN2–) is ±REFOUT2 voltage. These pins can be driven from VDD to GND. AIN1+, AIN1–...
For best performance, a buffer amplifier should be used to drive the analog inputs of the LTC2320-16. The amplifier provides low output impedance to minimize gain error and allows for fast settling of the analog signal during the acquisition phase. It also provides isolation between the signal...
According to the planned route, each driver was supposed to drive a full circuit on the grounds (two circles in roundabout), and the scenes passed in order were: long straight 1, roundabout, long straight 2, L-corner, width-limited road, continuous deceleration zone, L-corner, S-curve. ...
The whole road section was composed of straight road sections, with a total length of 40 km and a single lane width of 3.75 m. The scene that we designed in the simulated driving experiment was similar to the highway scene on the actual road. The road surface was smooth and open, ...