set ikev2 ipsec-proposal gcm256 ! interface Tunnel 100 nameif vti ip address 10.10.10.1 255.255.255.254 tunnel source interface [asa-source-nameif] tunnel destination [router-ip-address] tunnel mode ipsec ipv4 tunnel protection ipsec profile asa-vti ! tunnel-group [router-ip-address] ipsec-a...
Mode -等级优先 Expire - 终止 dst-port 目标端口 hotspot 暂时不做学习 icmp-options (integer | integer) - ICMP 选择 in-interface (name) - 进入接口 ipv4-options (any | loose-source-routing | no-record-route | no-router-alert | no-source-routing |no-timestamp | none | record-route | ro...
TunnelModeChildSessionParams.IConfigRequestIpv4DhcpServer 介面 參考 意見反應 定義 命名空間: Android.Net.IpSec.Ike 組件: Mono.Android.dll C# 複製 [Android.Runtime.Register("android/net/ipsec/ike/TunnelModeChildSessionParams$ConfigRequestIpv4DhcpServer", "", "Android.Net.IpSec.Ike...
Do not configure the shared keyword when using the tunnel mode ipsec ipv4 command for IPsec IPv4 mode. Static VTIs Versus GRE Tunnels The IPsec VTI is limited to IP unicast and multicast traffic only, as opposed to Generic Routing Encapsulation (GRE) tunnels, which have a wider application ...
For an example of per-socket policy, see How to Use IPsec to Protect a Web Server From Nonweb Traffic. For more information about tunnels, see the ipsecconf(1M) man page. For an example of tunnel configuration, see How to Protect a VPN With an IPsec Tunnel in Tunnel Mode Over IPv4....
Therefore, in tunnel mode, IPsec policy can be specified for subnets of a LAN behind a router and for ports on those subnets. IPsec policy can also be specified for particular IP addresses, that is, hosts, on those subnets. The ports of those hosts can also have a specific IPsec policy...
interface Tunnel1 mode ipsec description ip 183.69.12.12 ip address 3.3.3.1 255.255.255.0 source 183.64.12.133 tunnel protection ipsec profile abc # security-zone name DMZ # security-zone name Untrust import interface GigabitEthernet1/0/0 import interface Tunnel1 # ipsec transform-set abc esp encry...
tunnel local{ipv4-address|applied-interface} undo tunnel local 参数说明 参数参数说明取值 ipv4-address指定IPSec隧道的本端IPv4地址。点分十进制格式。 applied-interface 指定安全策略接口的主地址为IPSec隧道的本端地址。 说明: 该参数只在ISAKMP方式安全策略视图下有效。
IPSec: indicates tunnel mode of IPSec to protect data stream. MPLS: encapsulates packets into MPLS packets. IPv6 over IPv4: encapsulates IPv6 packets into IPv4 packets. IPv4 over IPv6: encapsulates IPv4 packets into IPv6 packets. SVPN: encapsulates packets into SVPN packets. ...
如果是使用TUNNEL起VPN的话，不管哪个运营商应该都没有问题，能起来，但是如果走IPSEC的话，请和运营商联系，运营商需要支持你做IPSEC。另外，如果本地的VPN设备与对端之间有NAT，建议把NAT改为静态的NAT，由于动态NAT改变端口，端口一旦发生变化，VPN无法配对。