The PC fails to ping the IP address of the connected carrier's device. Procedure The PC can ping the external interface's address of the AR, indicating that the gateway address configuration of the PC is incorrect. Run the display current-configuration | include Ethernet0/0/4 command to ...
The channels used by carrier signals, mobile phone hotspots, and home routers often overlap with 2.4 GHz channels, causing greater interference to 2.4 GHz channels with poor channel resources. With the promotion of 802.11ac and 802.11ax, most terminals in the market support the 5 GHz frequency,...
DESCR: "Network Convergence System 1004 Filler" PID: NCS1K4-LC-FILLER, VID: V01, SN: N/A NAME: "0/1", DESCR: "NCS1K4 12x QSFP28 2 Trunk C-Band DWDM card" PID: NCS1K4-1.2T-K9, VID: V00, SN: CAT2250B0AE NAME: "0/1-Optics0/1/0/2"...
(errors): 0 Carrier Sense (errors): 0 Giants (errors): 0 Symbol (errors): 0 SQE Test (errors): 0 Thresholded: 0 Ether Pause Stats: Time Collected: 2016-11-14T21:27:16.386 Monitored Object: fabric/lan/A/pc-1/pause-stats Suspect: No Recv Pause (pause): 0 Xmit Pause (pause): ...
0 lost carrier, - no carrier b. If the statistics are not zero, the following failures might occur: - Interface hardware failure—To test such a failure, connect the cable that is connected to the local port to a correctly operating port (for example, Port A) with ...
The downlink speed is the bandwidth that a user subscribes to from a broadband carrier. For example, after a user subscribes to a 200 Mbit/s broadband package, the downlink speed is 200 Mbit/s, but the uplink speed may be only dozens of megabits per second. Users can access the ...
0 lost carrier, - no carrier b. If the statistics are not zero, the following failures might occur: - Interface hardware failure—To test such a failure, connect the cable that is connected to the local port to a correctly operating port (for example,...
The downlink speed is the bandwidth that a user subscribes to from a broadband carrier. For example, after a user subscribes to a 200 Mbit/s broadband package, the downlink speed is 200 Mbit/s, but the uplink speed may be only dozens of megabits per second. Users can access the ...
Cause Solution The removable hard drive carrier is not fully seated in the enclosure frame or the hard drive is not fully seated in the carrier. Push the carrier into the enclosure frame so that the connector on the rear of the frame is properly seated. If this does not solve the problem...
Cause Solution The removable hard drive carrier is not fully seated in the enclosure frame or the hard drive is not fully seated in the carrier. Push the carrier into the enclosure frame so that the connector on the rear of the frame is properly seated. If this does not solve the problem...