If you’re still seeing a “power surge on USB port” error with a hub, you’ll need to look closely at your hardware. For instance, if yourUSB drive isn’t detected, insufficient power could be the cause, or theUSB ports might not be working. If you still have problems, it ...
you can try using a different USB port, or a different computer. If the device works on another computer or another USB port, then it's likely that there's a hardware issue with your original computer or USB port.
If your USB device is connected to a USB port on a portable computer docking station, try to connect the device directly to the USB port on the portable computer. If you verify that the problem is caused by the docking station, and the steps in this article do not resolve the problem, ...
These days, you can attach most hardware devices to computers by using a USB device, which is convenient and require no special skills or tools to use. Install a new USB hardware by plugging the device into a free USB port on your device, and the device driver installs automatically, ...
USB-C adapters are designed to be fully featured with Windows 10/11 and require a USB-C port on a PC configured for video output. Check your device specs to see if it supports USB-C. USB-C adapters don’t have an on/off switch or LED lights to indicate power, ...
Make sure Windows is up to date by going to Windows Update on your device and checking for available updates. Reboot your device and try again. Ensure your USB ports are not disabled in Device Manager. Try another USB 2.0 or 3.0 port. Try reinstalling the drivers in case they have...
Unplug your device from the USB port, then reconnect it to power-cycle the device and cause the change to take effect. In Windows Device Manager, the Ports (COM & LPT) section should now show three fewer COM ports. The number of Universal Serial Bus devices should remain the same. Lost...
Windows support for hard disks exceeding 2 TB "You do not have permission" error Storage hardware Storage Spaces System Restore or resetting your computer Volume Shadow Copy Service (VSS) Certificates and Public Key Infrastructure (PKI) Containers ...
If the keys and trackpad are working correctly in UEFI, but not in Windows: The problem is likely with the software installed on the Surface, and you'll need to reinstall. See Creating and using a USB recovery drive for Surface Go to Start , enter reset in the taskbar, then select Res...
After you add a new tape to your tape library without using Unlock library door or Add tape (IEPort), the new tape might not appear in the DPM Library Management task area. To display the new tape, do the following: 1. In DPM Administrator Console, click Management on the taskbar. 2...