1If your dishwasher won't start, see if the power cord fits snugly into the outlet. 2Do not use an extension cord. Plug the dishwasher directly into the wall. 3Test the outlet with another appliance, and see if it's actually working. ...
Reconnect and check power cordsIf the computer is not getting enough power or the power is getting interrupted, the computer can encounter problems. Disconnect your power cables from any power strip or UPS and connect the computer directly to a known good wall outlet.Is it a hardware or ...
Reconnect the power cord to the printer and to a wall outlet. Note: HP recommends plugging the printer directly into a wall outlet. Turn on the computer or mobile device. Check the connection to make sure the same network is used by the printer and the device. Computer or mobile device...
Try to use awell-Known workingpower outlet. Try a spare power supply on the same slot. Try the same faulty PS in awell-known workingslot. Try the same faulty PS in a different switch. Note:If applicable, ensure there are no cable tie or any other object that can ...
Plug your base into another wall outlet to see if that helps.
Loose cables:Ensure that the cables connected to your router, modem, and wall outlet are screwed in tightly. Loose cables can lead to a weak or spotty connection. Check that your Ethernet cables make an audible clicking sound when fully inserted and that you can’t pull out the cable withou...
Check that your USB hub is properly connected to both Square Stand and a wall outlet using the power adaptor and power cable. Try updating and restarting the Square app. If you are using a Square Stand, carefully remove your iPad from the Square Stand and fully power down and restart the...
Microwave oven has no power “I own a GE over the range microwave that I’ve already replaced three times due to repeated failures. Most recently, the microwave has completely lost power and won’t turn on at all. I’ve tested the outlet with other appliances, and it’s delivering power...
Ensure the power cord is correctly inserted in the rear of the Hisense television, and then try a different wall outlet. If the television still won’t turn on, unplug it, wait 60 seconds, and then plug it back in. Trevor Eason
then plug the television back into the electrical outlet. If you're using a surge protector or power strip, Sony warns you should plug the television directly into the wall outlet instead. The surge protector may otherwise interfere with the power-up cycle, especially if it is old or damaged...