5 μm particle size) or equivalent columns that guarantee baseline separation for furosine without interfering with other peaks. Gradient elution was performed using solvent A (0.4% acetic acid solution) and solvent B (0.3%potassiumchloride solution) starting at 100% A. Flow rate was set to 1.2...
of layers: 9, infill pattern: linear, flow rate during the printing process: 1 mL/h, and printing speed at 10 mm/s. Figure 1. Production and characterization of the scaffolds using 3D printing and demonstration of their role in the wound healing process. 2.2.3. Rheological Characterization...