这时候电脑设置静态IP,浏览器输入192.168.1.1就能进到熟悉的uboot界面。 点击“选择文件”按钮,选择“openwrt-mediatek-filogic-cudy_tr3000-mod-squashfs-sysupgrade.bin”这个不带V1的固件刷入。 待路由器自动重启,依旧是浏览器输入192.168.1.1密码password,进到系统,看下软件包剩余空间,就知道是不是大分区了。 ...
这时候电脑设置静态IP,浏览器输入192.168.1.1就能进到熟悉的uboot界面。 点击“选择文件”按钮,选择“openwrt-mediatek-filogic-cudy_tr3000-mod-squashfs-sysupgrade.bin”这个不带V1的固件刷入。 待路由器自动重启,依旧是浏览器输入192.168.1.1密码password,进到系统,看下软件包剩余空间,就知道是不是大分区了。 ...
这时候电脑设置静态IP,浏览器输入192.168.1.1就能进到熟悉的uboot界面。 点击“选择文件”按钮,选择“openwrt-mediatek-filogic-cudy_tr3000-mod-squashfs-sysupgrade.bin”这个不带V1的固件刷入。 待路由器自动重启,依旧是浏览器输入192.168.1.1密码password,进到系统,看下软件包剩余空间,就知道是不是大分区了。 ...
这时候电脑设置静态IP,浏览器输入192.168.1.1就能进到熟悉的uboot界面。 点击“选择文件”按钮,选择“openwrt-mediatek-filogic-cudy_tr3000-mod-squashfs-sysupgrade.bin”这个不带V1的固件刷入。 待路由器自动重启,依旧是浏览器输入192.168.1.1密码password,进到系统,看下软件包剩余空间,就知道是不是大分区了。 ...
点击“选择文件”按钮,选择“openwrt-mediatek-filogic-cudy_tr3000-mod-squashfs-sysupgrade.bin”这个不带V1的固件刷入。 待路由器自动重启,依旧是浏览器输入192.168.1.1密码password,进到系统,看下软件包剩余空间,就知道是不是大分区了。 最后要恢复官方固件的话,我直接复制暗云大佬的原话了,我也没恢复过,估计...
▲ 浏览器输入:192.168.1.1即可进入uboot的web控制台了,在这里可以随意刷写固件,可以看到有默认原厂分区、以及mod-112m分区、114m分区。 推荐的openwrt固件 现在TR3000的OP固件就好像吃鸡游戏,入围阶段,没有绝对强势的固件,每个人需求不同建议可以自行尝试,寻找适合自己的版本,说下目前我刷过的固件,KWRT也就是open...
▲ 这是一个大分区固件,选择mod-112m的布局,然后选择文件openwrt-mediatek-filogic-cudy_tr3000-mod-squashfs-sysupgrade后上传、点击更新,等待固件刷写完毕即可。 等待3到5分钟路由器重启后,电脑重新获取IP,浏览器输入:192.168.1.1进入openwrt系统后台,密码:password ...
进入过渡固件后台后,上传「openwrt-mediatek-filogic-cudy_tr3000-v1-squashfs-sysupgrade.bin」,记得勾选"不保留配置"选项! 🔥第三步:刷入Uboot 进入升级后的过渡固件后台-文件管理,上传大分区mt7981_cudy_tr3000-mod-u-boot.fip文件,打开ttyd终端登录后输入:mtd write mt7981_cudy_tr3000-v1-u-boot.fip...
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. - mediatek:
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. - mediatek: