Prior to printing, the corresponding print file was prepared. The desired part was modelled using SolidWorks software and exported in STL format. The exported STL file was loaded into slicing software (IEMAI 3D EXPERT, Dongguan Imai Intelligent Technology Co., Ltd, China), where the print ...
wherem1is the weight of the specimen after the abrasion test in g;m2is the weight of the specimen after the abrasion test in g;dis the density of the test specimen;gis the abrasive grade (loss in weight of the drum distance).
FDM depends primarily on computer-aided design (CAD) to generate 3D models, which can be converted into Standard Tessellation Language (STL) format, and further read by the slicing software, which includes Apex 1.8.4 [18], Makerbot Print 4.10.1 [19] and Cura 4.3 [20]. Kokcu et al. [...
A) Full printing test to see whether it could absorb the ink. B) We will check the size whether all ok. C) We will open 5-10% quantity to check whether any discrepanyhappenedon the surface. D) We will examine the color, weight, tearing strength, peeling strength, te...
CHECKLISTFOR OV-1 AIRCRAFT, SURVIVAL VEST, SMALL, PART NO. 11- (NSN1680-00-187-5716) AND LARGE, PART NO. 11-1-468-2 (1680-00-205-0474) TM-55-4920-429-23P ADVANCED FLIGHT CONTROL SYSTEM (AFCS) LINE TEST SET (NSN4920-01-121-0603)...
Use the provided CAD files (.dxf or .svg) to cut an acrylic plate out of 3mm clear acrylic. You can also 3D-print a plate using the supplied .stlfile. After cutting, peel off the protective foil. 1.2: Attach the Coral USB Accelerator ...
Slicing software Simplified3D [63] was used to convert the STL file into geometric code (G-code) so that it can be read by the multi-material FDM 3D printer. Here, in multi-material 3D printing process, a layer-by-layer adhesion technique was adopted that alternates ABS and TPU layers,...