1、中国大陆地区销售的机型如果带TPM功能默认状态为Hidden(隐藏),如果要开启TPM功能需要先将其设置为Available(可用) 2、只有TPM Device(TPM设备)设置为Available(可用)后,TPM State(TPM状态)才可以对TPM功能进行Enable(启用)或Disable(禁用)的设置 3、如果没有TPM Device(TPM设备)选项意味着该机不支持TPM功能,也不...
The-e(or--enable) option changes the system TPM to the enabled state (through theTPM_OwnerSetDisableAPI). This operation is persistent, and it prompts for the owner password. The-d(or--disable) option (through theTPM_OwnerSetDisableAPI) changes the system TPM to the disabled state. This ...
1 Boot the computer to BIOS or UEFI firmware settings. 2 Look to see if you may have a Trusted Platform Module (TPM) or PTT type setting to enable or disable. OPTION FOUR To See if PC has a TPM and TPM Details in Windows Security 1 Open the Windows Security, and click/tap on th...
Enables or disables the TCM function. The options are as follows: Enable Disable Enable Clear TCM Indicates whether to clear the TCM configuration. The options are as follows: Enable Disable NOTE: After the TCM configuration is cleared, this parameter restores to the Disable state. Disable Tab...
Enables or disables the TCM function. The options are as follows: Enable Disable Enable Clear TCM Indicates whether to clear the TCM configuration. The options are as follows: Enable Disable NOTE: After the TCM configuration is cleared, this parameter restores to the Disable state. Disable Tab...
TPM State - Enable Then i restart PC with saving changes, but TPM State switch back to disable. Why? Can you help me pls?( Subj: https://www.youtube.com/watch?v=z3BltAeCHV0 AMD Ryzen 5 3550H with Radeon Vega Mobile Gfx https://www.youtube.com/watch?v=z3BltAeCHV0 youtube....
tpm_setenable reports the status of the TPM's flags regarding the enable state of the TPM. This is the default behavior and also accessible via the --status
FVE_E_POLICY_USER_ENABLE_RDV_NOT_ALLOWED 0x80310078 组策略设置不允许在可移动数据驱动器上启用 BitLocker 驱动器加密。 如果需要打开 BitLocker,请联系系统管理员。 FVE_E_POLICY_USER_DISABLE_RDV_NOT_ALLOWED 0x80310079 组策略设置不允许关闭可移动数据驱动器上的 BitLocker 驱动器加密。 如果需要关闭 Bit...
TPM 2.0:在初始化之前使用 NV 索引,或無法還原TPM2_Shutdown(STATE) 所儲存的狀態。 TPM_20_E_NV_SPACE 0x8028014B TPM 2.0:NV 配置的空間不足。 TPM_20_E_NV_DEFINED 0x8028014C TPM 2.0:已定義 NV 索引或持續性物件。 TPM_20_E_BAD_CONTEXT 0x80280150 TPM 2.0:TPM2_ContextLoad中的內容無效...
Indicates the last requested state for the element is unknown.Enabled (2) Indicates that the element executes or could execute commands, processes any queued commands, and queues new requests.Disabled (3) Indicates a request to immediately disable the element, such that it does not execute or ...