Note: There is “management vlan” on the old TP-Link switch, like TL-SG3424 and TL-SL5428E. So if you have changed the management vlan(the default management vlan is “vlan 1”)from vlan 1 to vlan 2 on TL-SL5428E,the commands to change the management IP address should be changed...
In factory default setting, all the ports belong to VLAN 1, so you can access the switch using the IP address of VLAN 1, which is 192.168.0.1. Therefore, if you need to change the IP address, you can just change the IP address of VLAN 1. For Smart switches (T1500 and T1500G serie...
Check the browser address.If you can't get the TP-Link login page, double-check to make sure that the address or IP entered in the address bar is correct. Try another web browser.Switch from your normal browser to a different one and attempt to log in there. ...
dhcp功能就是给你的机器自动分配ip的。默认开启，不用关闭。dns要填你的isp服务提供商给你的dns地址。ip比较重要。因为你接的是交换机，而除了企业用的三层交换机有ip功能外，我们一般的几十元的小switch是没有ip端口分配功能的。所以外网ip仍填isp给你分配的ip地址即可！另外需要说一下，无线路由器...
Confirm that your web browser supports thenetweb address. If it is not, then switch to another browser. Delete the unnecessary cache and cookies from the browser. Make sure you have an updated version of the Tether app otherwise delete it and reinstall. ...
TP-LINK 24+2G Gigabit Switch TL-SL1226 User 说明书
such as a wall between the router and the end device. The WLAN transmission power and thus the range can be reduced in the menu, there are a total of three power levels. There is also the option to automatically switch off the WLAN after 10 minutes if no device is active in the WLAN...
我有一台tplink路由器,并进行了以下设置: Service Port:27015 IP Address: my_ip_address # obtained by ifconfig Protocol: All Status: Enabled 现在我使用python manage.py my_ip_address:27015运行我的项目但是,当我在连接到另一个网络的另一台机器上使用url中的my_i 浏览5提问于2015-01-15得票数 4 ...
14 Note: When Get GMT is selected and the switch failed to get time from the configured time server, the switch will change to get time from the latest time server from which you got time successfully or from the public time server in its default network. 4.1.4 System IP Each device ...
Generally, TP-Link EasyMesh doesn't allow for managing the satellite unit's network or USB ports. In a fully wireless setup, there's no way to control which band works as the backhaul, either. Additionally, you can't access the satellite's web interface via its IP address. ...