Is formed by coupling to the torque converter cover by bolts, the outer peripheral surface of which is formed a plurality of projections with an elastic member so as to prevent vibration and noise, the flexible plate is a hole at a position corresponding to the projections, respectively After ...
A torque limiter uses a built-in clutch system designed to release when the resistance at the fastener exceeds the resistance of the clutch. Generally, torque limiters are used on lower-torque fasteners such as stems, bars, rotor bolts, cable pinch bolts, etc. Park Tool offers theATD-1.2Adju...
Flexplate bolts: 55 ft-lbs. Water Pump/Timing Cover bolts: 30 ft-lbs. Converter bolts: 270in-lbs.NOT ft-lbs. Oil Pump bolts: 30 ft-lbs. (Chrysler) It is often difficult to get to the bolts with a torque wrench. When this happens it is best to snug the bolts but not to go ov...
A torque converter cover including a protrusion extending from an outer surface of the torque converter cover and symmetrical about an axis of rotation for the cover and a pilot bos
A flywheel assembly 1 includes a flywheel 2, a flexible plate 3 and a dynamic damper 4 to reduce the noise of an engine during acceleration of the speed of the engine. The flexible plate 3 connects th
(PPP) , PIA Flex Plate, PIA w/trans PIA, Bolt, Flex plate to Torque Converter PIA, Washer, Flex plate to Torque Converter 6/11/2019 2018 Cobra Jet BOM & Torque Sheet 2018 Part Number 420445 S550-PANHARD-BAR-ASSEMBLY-A 218213 218309 JNL-1216 JNR-1216 VCAB-12 VCAM-12 W709865-S439 ...
A torque limiter uses a built-in clutch system designed to release when the resistance at the fastener exceeds the resistance of the clutch. Generally, torque limiters are used on lower-torque fasteners such as stems, bars, rotor bolts, cable pinch bolts, etc. ...
5203835Lock-up torque converter for automatic transmission1993-04-20Kohno et al.192/3.29 5121821Fluid torque converter and flexplate coupling1992-06-16Poorman et al.192/3.28 4966261Lock-up torque converter for automatic transmissions1990-10-30Kohno et al.192/3.29 ...
A drive plate for connecting the housing of a coupling device, especially a hydrodynamic torque converter, to a drive element such as a flexplate fixed to a drive shaft, wherein the