Flapper valve gasket –the connection between the tank and the bowl where the flapper valve rests Rim holes –tiny holes along the rim where water comes out that rinses the sidewalls of the toilet bowl Siphon jet –a large water jet located alongside the rim that flushes the water through...
I had black mineral stains on three toilet bowls due to the flapper not making a good seal. Replace all three flappers and used 320 and 600 grit wet/dry sandpaper. The sandpaper did the trick. good luck. Answerthis Question 28 More Questions ...
A toilet that flushes on its own, also known as phantom or ghost flushing, is a common problem. Addressing this problem may require replacing the flapper, flush valve, or flush valve gasket. In this article, I show you how.
2004 – This comprehensive field study of the durability of toilet flappers, and the habits and practices of homeowners with respect to flapper replacement and use of in-tank bowl cleaning tablets, involved the inspection of 892 randomly selected toilet fixtures in homes throughout California. Produc...
Complete flapper valve and flapper valve seat replacement is not technically difficult either, but one has to remove the whole toilet tank from the bowl, take apart the old valve and standpipe, and install a new one - more trouble. Before taking these steps, try just cleaning off the flapp...
Take the old flapper with you to the hardware store and find a replacement. It doesn’t need to be the same brand, but it does need to be the same style.[9] You may have: A traditional rubber flapper. These are the bulbous rubber flappers you find in 99% of toilets. An old sch...