PROBLEM TO BE SOLVED: To provide a toilet bowl device capable of suppressing an underfloor height while securing sufficient drainage performance.SOLUTION: A toilet bowl device 1 having a toilet bowl 100 with a drain port 102d on a bottom of a bowl 102 includes a drain socket 210 connected ...
Some flapper leaks are too slow to notice, but they still waste water. If you suspect you have a flapper leak, try this test: Pour some food coloring in the tank, and avoid using the toilet for several hours or overnight. The test is positive if the bowl water takes on the same hue...
Whether your toilet problem occurs when Flushing, Refilling or Not in Use, choose a tab below to help find the solution: FLUSHING REFILLING NOT IN USE Hearing hissing, rumbling or thumping when flushing? Need more than one flush to clear the bowl? Yourfill valve,flapperorflush valvecould be...
The Problem: You flush the toilet. It drains properly, but then you continue to hear a trickling of water that never ends. This is most likely caused by water running from the tank into the bowl. It could also be caused by a faulty flapper valve or fill valve. The Fix: Luckily, this...
Step 3–If you replace the flapper and the toilet continues to drain down (repeat step 2 if necessary) then we recommend replacing the flush valve as this will ultimately stop the constant draining of water from the tank to the bowl. We recommend the K-507A-008 flush valve if you have...
Reach inside the toilet and push down the flapper valve that is letting the tank empty water into the toilet bowl - this will stop water from entering the toilet and if you're quick enough, prevent sewage from overflowing onto the floor. This will be a rubber valve in the center of the...
A clogged toilet is not only messy, it’s gross. You’re going to want to tackle this problem before it gets out of hand. Here’s what you’ll need: Materials: Unsurprisingly, unclogging the toilet bowl can be messy. Gloves are never a bad idea here. You’ll also want to make sure...
Water is leaking from the tank into the bowl. The fill tube is refilling too much water into the tank and causing the toilet overflow tube to activate. You should be able to stop either problem quickly by adjusting the flapper, float, or tubes. ...
It is still possible to flush a toilet when the handle is broken. All that you have to do is to open your toilet’s tank, find the part called “the flapper”, and then lift it up. Doing this will result in an immediate release of water into the toilet bowl which will then flush...
The flush valve pushes the water from the tank into the bowl to flush the waste away into the sewer. However, if the rubber flapper is failing to work properly, water will continuously seep into the bowl causing it to run constantly. If this is in fact your problem, then ...